Loading ...
Loading ...
Loading ...
INSTALLING BATTERIES
To insert the batteries, open the flap on the back of the remote control by sliding if off. Strictly adhere to the polarity signs on
the bottom of the battery housing, close the flap once the batteries have been inserted.
REMOTE CONTROL
• Only use two dry LR03 AAA 1.5V Batteries (included) in the remote control
• Always change both batteries at the same time
REPLACING THE REMOTE BATTERIES
This air conditioner comes with two AAA batteries. Place the batteries in the remote control
before use.
1. Slide the back cover from the remote downward to expose the battery compartment.
2. Insert the batteries, ensure to match the (+) and (-) symbols on the ends of the
batteries with the symbols inside the battery compartment.
3. Slide the battery cover back into place.
Notes:
• The air conditioner will not respond if curtains, doors or other materials block the signal from the remote control to the unit.
• Prevent any liquid from contact with the remote control. Do not expose the remote control to direct sunlight or heat.
• If the infrared signal receiver on the indoor unit is exposed to direct sunlight, the air conditioner may not function properly.
Use curtains to prevent the sunlight from falling on the receiver.
• Do not mix old and new batteries or batteries of different types.
• Do not leave the batteries in the remote control if it is not going to be used for more than two months.
CARE AND MAINTENANCE
• Always unplug the unit before cleaning or servicing.
• DO NOT use ammable liquids or chemicals to clean the unit.
• DO NOT wash the unit under running water. Doing so causes electrical danger.
• DO NOT operate the portable air conditioner if the power supply was damaged during cleaning. A damaged power cord must
be replaced with a new cord. Contact Whynter Customer Support for more information.
AIR FILTER
The air filter should be cleaned every two weeks to ensure efficient performance. In households with animals, the air filters may
need to be cleaned more often and the external grills may need to be wiped to prevent blocked air flow.
1. Switch off the air conditioner.
2. Remove the washable filter from the unit.
3. Use a vacuum cleaner or tap lightly to remove loose dust and dirt.
4. Rinse the filter thoroughly under warm running water (no hotter than 100° F.)
5. Dry thoroughly before re-inserting the filter.
END OF SEASON STORAGE
1. Drain all water from the appliance.
2. Run the appliance on Fan mode for half a day in a warm room to dry the inside of the appliance and prevent mold
formation.
3. Turn off the appliance and unplug it, wrap the cord and bundle it with tape.
4. Remove the batteries from the remote control.
5. Clean the air filters and reinstall them.
6. Store the appliance in a cool, dark place. Prolonged exposure to direct sunlight or extreme heat can shorten the lifespan of
the appliance.
UNIT CLEANING
• Unplug the appliance before cleaning or servicing.
• Clean the housing with a lukewarm damp cloth and neutral detergent. Dry the housing with a lint-free dry cloth.
• Do not use gasoline, paint thinner or other chemicals to clean the appliance.
• Do not wash the appliance directly under a tap or using a hose. It may cause electrical damage.
DISPOSAL
This appliance should not be treated as regular household waste. Check for local regulatory compliance regarding the approved
and safe disposal of this appliance.
12
Loading ...
Loading ...
Loading ...