Loading ...
Loading ...
Loading ...
To enjoy a more dynamic sound
Pull the lever on the bottom of the speaker in the direction of the arrow shown in the illustration below to remove the grille.
*2
Hint
After SongPal is downloaded and installed to your smartphone, iPhone, etc., you can use it as a remote control to adjust the speaker’s volume, etc.
Note
Sony does not guarantee correct operation when a USB hub or USB extension cable is used. Do not disconnect the PC during operation. To prevent
damage to data, stop playback, then turn off the power of the speaker before disconnecting the PC.
Digital broadcast audio is not output from the USB port of the PC. To listen to digital broadcast audio, connect the PC’s analog audio output to the
For details on the procedure, refer to [How to use] on the “Sony | Music Center for PC” support website.
http://www.sony.net/smc4pc/
Follow the instructions on the PC screen to operate.
3.
Operate the PC to start playback a High-Resolution Audio file and adjust the volume to a moderate level.
To play back High-Resolution Audio files on the PC, use “Sony | Music Center for PC” or “Hi-Res Audio Player.”
3
Tap the –/+ (volume) buttons to adjust the volume.
When you tap the –/+ (volume) buttons, the
(power) indicator flashes once or three times according to the volume.
4
After removing the speaker grille, do not touch the exposed part of the speaker (speaker units), and keep the removed grille on a flat surface to prevent
distortion.
*2
184
Loading ...
Loading ...
Loading ...