Subaru 2018 CROSSTREK 2.0I LIMITED Car

User Manual - Page 294

For 2018 CROSSTREK 2.0I LIMITED.

PDF File Manual, 474 pages, Read Online | Download pdf file

2018 CROSSTREK 2.0I LIMITED photo
Loading ...
Loading ...
Loading ...
(303,1)
Model "A1320BE-C" EDITED: 2017/ 10/ 10
& Vehicle Dynamics Control
system monitor
Refer to Vehicle Dynamics Control warn-
ing light/Vehicle Dynamics Control opera-
tion indicator light F3-23 and Vehicle
Dynamics Control OFF indicator light F3-
24.
& Vehicle Dynamics Control
OFF switch
Press the Vehicle Dynamics Control OFF
switch to deactivate the Vehicle Dynamics
Control system. Creating adequate driving
wheel slip by deactivating the Vehicle
Dynamics Control system may help to
recover from the loss of traction. Use the
Vehicle Dynamics Control OFF switch as
necessary.
. a standing start on a steeply sloping
road with a snowy, gravel-covered, or
otherwise slippery surface
. extrication of the vehicle when its
wheels are stuck in mud or deep snow
When the switch is pressed during engine
operation, the Vehicle Dynamics Control
OFF indicator light
on the combination
meter illuminates. The Vehicle Dynamics
Control system will be deactivated and the
vehicle will behave like a model not
equipped with the Vehicle Dynamics Con-
trol system. When the switch is pressed
again to reactivate the Vehicle Dynamics
Control system, the Vehicle Dynamics
Control OFF indicator light turns off.
With the Vehicle Dynamics Control system
deactivated, traction and stability en-
hancement offered by Vehicle Dynamics
Control system is unavailable. Therefore
you should not deactivate the Vehicle
Dynamics Control system except under
above-mentioned situations.
NOTE
. When the switch has been pressed
to deactivate the Vehicle Dynamics
Control system, the Vehicle Dynamics
Control system automatically reacti-
vates itself the next time the ignition
switch is turned to the LOCK/OFF
position and the engine is restarted.
. If the switch is held down for 30
seconds or longer, the indicator light
turns off, the Vehicle Dynamics Control
system is activated, and the system
ignores any further pressing of the
switch. To make the switch usable
again, turn the ignition switch to the
LOCK/OFF position and restart the
engine.
. When the switch is p ressed to
deactivate the Vehicle Dynamics Con-
trol system, the vehicles running per-
formance is comparable with that of a
vehicle that does not have a Vehicle
Dynamics Control system. Do not de-
activate the Vehicle Dynamics Control
system except when absolutely neces-
sary.
. Even when the Vehicle Dynamics
CONTINUED
Starting and operating/Vehicle Dynamics Control system
7-37
7
Loading ...
Loading ...
Loading ...