Subaru 2018 CROSSTREK 2.0I LIMITED Car

User Manual - Page 154

For 2018 CROSSTREK 2.0I LIMITED.

PDF File Manual, 474 pages, Read Online | Download pdf file

2018 CROSSTREK 2.0I LIMITED photo
Loading ...
Loading ...
Loading ...
(159,1)
Model "A1320BE-C" EDITED: 2017/ 10/ 10
& Brake system
warning light (red)
This light illuminates with the parking
brake applied while the ignition switch is
in the ON position. It turns off when the
parking brake is fully released.
WARNING
. Driving with the brake system
warning light on is dangerous.
This indicates your brake system
may not be working properly. If
the light remains illuminated,
have the brakes inspected by a
SUBARU dealer immediately.
. If at all in doubt about whether the
brakes are operating properly, do
not drive the vehicle. Have your
vehicle towed to t he nearest
SUBARU dealer for repair.
The brake system warning light has the
following functions.
! Brake fluid level warning
This light illuminates when the brake fluid
level has dropped to near the MIN level of
the brake fluid reservoir with the ignition
switch in the ON position and with the
parking brake fully released.
If the brake system warning light should
illuminate while driving (with the parking
brake fully released and with the ignition
switch positioned in ON), it could be an
indication of leaking of brake fluid or worn
brake pads. If this occurs, immediately
stop the vehicle at the nearest safe
location and check the brake fluid level. If
the fluid level is below the MIN mark in
the reservoir, do not drive the vehicle.
Have the vehicle towed to the nearest
SUBARU dealer for repair.
! Electronic Brake Force Distribution
(EBD) system warning
The EBD system may be malfunctioning if
the brake system warning light
/ ,
Vehicle Dynamics Control warning light
and ABS warning light / illuminate
simultaneously during driving.
Even if the EBD system fails, the conven-
tional braking system will still function.
However, the rear wheels will be more
prone to locking when the brakes are
applied harder than usual and the vehicles
motion may therefore become somewhat
harder to control.
If the brake system warning light
/ ,
Vehicle Dynamics Control warning light
and ABS warning light / illuminate
simultaneously, take the following steps.
1. Stop the vehicle in the nearest safe, flat
location.
2. Shut down the engine, apply the
parking brake and then restart it.
3. Fully release the parking brake.
4. Even if all the warning lights do not
come back on, the EBD system may have
a possible malfunction. Drive carefully to
the nearest SUBARU dealer and have the
system inspected.
5. If all the warning lights stay illuminated
or come back on after approximately 2
seconds, shut down the engine, apply the
parking brake and check the brake fluid
level.
. If the brake fluid level is not below the
MIN mark, the EBD system may be
malfunctioning. Drive carefull y to the
nearest SUBARU dealer and have the
system inspected.
. If the brake fluid level is below the MIN
mark, DO NOT drive the vehicle. Instead,
have the vehicle towed to the nearest
SUBARU dealer for repair.
! Vacuum pressure system warning
The brake system warning light
/ will
illuminate when the vacuum pressure
sensor is malfunctioning or brake booster
pressure is decreasing.
If the brake warning light continues to
illuminate for several minutes after starting
CONTINUED
Instruments and controls/Warning and indicator
3-21
3
Loading ...
Loading ...
Loading ...