Loading ...
V2 ENGLISH 17-0517
7 Secure the charger outlet to
the wall box with the two
long screws (provided).
8 Secure the wall plate to the
charger outlet with the two
short screws (provided).
9 Restore power by
replacing the fuse or
turning on the circuit
breaker. The charger
outlet is ready to use.
USING THE CHARGER OUTLET
• To charge USB devices (like mobile phones or
tablets), plug USB cables into the USB ports on
the charger outlet and into the USB ports on
the devices.
INDICATOR LED
• Green: surge protected
• LED o: not protected, USB output will be
turned o
Note: Only applicable if the outlet is receiving power.
The LED is not lit when power is shut o to outlet.
SPECIFICATIONS
Dimensions (L × W × H)
With plate:
4.7 × 3 × 1.9 in. (120 × 76 × 47.6 mm)
Without plate:
4.2 × 1.7 × 1.9 in (106 × 44 × 47.6 mm)
Electrical
Line Voltage: 125V A C @ 60 Hz
USB Rating: Two USB ports with total 3.6A, 5V DC
Surge protection: 1 lines (L-N)
Clamping voltage: L-N = 500 volts
Maximum surge current: 15,000 amps
Maximum energy dissipation: 360 joules
Wire Terminals: #14-#12 AWG
LEGAL NOTICES
FCC Statement
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two
conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that
may cause undesired operation. This equipment has
been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide
reasonable protection against harmful interference
in a residential installation.
This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and
used in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause harmful interference to
radio or television reception, which can be
determined by turning the equipment o and on,
the user is encouraged to try to correct the
interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and receiver.
• Connect the equipment into an outlet on a circuit
dierent from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV
technician for help.
Warning: Changes or modications not expressly
approved by the party responsible for compliance
could void the user's authority to operate the
equipment.
ICES-003
This Class B digital apparatus complies with
Canadian ICES-003.
ONEYEAR LIMITED WARRANTY
Visit www.insigniaproducts.com for details.
CONTACT INSIGNIA:
For customer service, call 877-467-4289 (U.S. and
Canada) or 01-800-926-3000 (Mexico)
www.insigniaproducts.com
INSIGNIA is a trademark of Best Buy and its aliated companies
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richeld, MN 55423 U.S.A.
©2017 Best Buy. All rights reserved
Made in China