Loading ...
Loading ...
3
RESIDENT - SYSTEM PROGRAMMING USING THE HOUSE PHONE
PROGRAM
NUMBER
DESCRIPTION TO PROGRAM
**01
ENABLE CALL FORWARDING
Factory Setting: Disabled NOTE: This setting requires the system to
be connected to the residence’s phone line and Telco Mode to be
enabled (see Installation and Set Up Manual).
**01
**02
DISABLE CALL FORWARDING **02
**03
ENABLE INTERCOM MODE Factory Setting: Disabled
**03
**06
VERIFY CALL FORWARDING NUMBER (VIA CALLER ID)
Factory Setting: Disabled
**06 Hang up the phone - Wait
for the ring.
**07
ENABLE TELCO MODE Factory Setting: Enabled
**07
**#8
ERASE CALL FORWARDING NUMBER
NOTE: This command will also disable the call forwarding mode.
**#8
**10
ADJUST “PICK UP” RING COUNT Factory Setting: 5 **10 + Ring Count 2 through 5
**13
ENABLE ALTERNATE DTMF PROGRAMMING
This feature changes the leading programming digits from ** to ##
(and *# to #*) to work around phone lines (or telephone equipment)
that reacts to the * tone. Factory Setting: Disabled
**13
NOTE: The telephone line
should be disconnected while
entering this command.
**14
ENABLE STANDARD (LONG) RING TONE Factory Setting: Enabled
**14
**15
ENABLE ALTERNATE (DUAL) RING TONE
Factory Setting: Enabled NOTE: Alternate ring tone function may not
work with all phones
**15
#*16
DISABLE ALTERNATE DTMF PROGRAMMING #*16
*# Call
Forwarding
Number #
ENTER CALL FORWARDING TELEPHONE NUMBER
*# + Telephone Number (Up to
14 digits)
+ #
PROGRAM
NUMBER
DESCRIPTION TO PROGRAM
**04 ENABLE PARTY (LATCHED) MODE - RELAY 1
Party Mode will latch the relay and keep the entry device open to allow guests
access to property. To disengage party mode: Enter “*9” into the local telephone.
**04
**05
DISABLE PARTY (LATCHED) MODE - RELAY 1
To disengage party mode: Enter “*9” into the local telephone.
**05
*5
ACTIVATES RELAY 2 *5
*9
ACTIVATES RELAY 1 *9
**11
ENABLE “DO NOT DISTURB” MODE
This mode disables calls from the system to the house or forwarded telephone.
Factory Setting: Disabled
**11
**12
DISABLE “DO NOT DISTURB” MODE **12
PROGRAM
NUMBER
DESCRIPTION TO PROGRAM
0
By entering 0 the audio is initiated for the resident to have a phone conversation
with the visitor (also extends talk time).
0
*5
ACTIVATES RELAY 2 *5
*9
ACTIVATES RELAY 1 *9
CALL WAITING
Press “
Flash” once to answer guest, press again to return to outside call on telco
line, if
*9 or *5 is not pressed. If *9 (relay 1) or *5 (relay 2) is pressed, the
EL1SS will automatically return to the telco line.
RESIDENT - DIRECT COMMANDS USING THE HOUSE TELEPHONE
RESIDENT - DIRECT COMMANDS USING A FORWARDED TELEPHONE
Loading ...
Loading ...
Loading ...