Loading ...
Loading ...
Loading ...
This equipment, in the parts intended to come into contact with food
products, is in conformity with the requirements of EC Regulation
No. CE 1935/2004. Apparatus conforms with European Directive
2004/1 08/EC, 2006/95EC and successive amendments.
Hereby Candy Hoover Group declares that this aplliance marked 0051
complies with essential requirements from the R&TTE 1995/5/CE
Directive. In order to receive a copy of the declaration of compliance, please
contact the manufacturer through the website: www.candy-group.com
2- If present, install the wall spacer in a central position at the rear of
the appliance.(Fig.2)
3- Adjust the feet to ensure the stability of the appliance and prevent
vibrations and noise (fi g. 3). If the front part is higher than the rear, the
door can be closed more easily.
NOTE:
If your refrigerator is in stainless steel or other special finish, it might come
with a peel-off coating that protects the surface.
To remove this protection, do not use sharp objects that could damage it.
After shipping, place the appliance vertically and wait at least 2 - 3 hours
before connecting it to the electrical system. Before inserting the plug into
the electrical socket, make sure that:
• The socket is earthed and in compliance with the law.
• The socket can withstand the maximum power load of the appliance, as
indicated on the nameplate of the refrigerator.
• The power supply voltage is within the amounts indicated on the
nameplate of the refrigerator.
• The socket is compatible with the plug of the appliance. If not, request
replacement of the plug by an authorized technician; do not use extension
cords and/or multiple connectors.
• When the appliance is installed, the electrical cord and the current socket
must be easily reached.
• The cord must not be folded or compressed.
• The cord must be checked regularly and replaced solely by authorized
technicians.
• The manufacturer declines any liability whenever these safety measures
are not respected.
Remove all wrapping/packaging present inside the appliance and clean
with water and baking soda or neutral soap.
After the installation, wait 2 - 3 hours to allow time for the refrigerator/ freezer
to stabilize at normal working temperature, before placing fresh or frozen
foods inside.
If the power cord becomes disconnected, wait at least five minutes before
restarting the refrigerator/ freezer. At this point, the appliance is ready for
use.
The fan is preset to OFF.
To activate, press the switch (fi g. 6)
To optimize energy consumption, it is recommended that you turn the fan
on only when the ambient air temperature exceeds 28 to 30°C.
Electrical connection
Appliance start-up
Fig.2
Fig.3
By ensuring that this product is properly disposed of, you will help prevent
potential negative consequences for the environment and human health,
which could otherwise arise due to inappropriate waste handling of this
product on reaching the end of its working life.
With proper disposal of the appliance, it is possible to recover valuable
raw materials!
This appliance is marked as conforming to the European Directive
2012/19/EU on Waste of Electrical and Electronic Equipment (WEEE).
The symbol on the product indicates that this appliance may not be
treated as normal household waste; it must, instead, be delivered over
to the nearest collection point for the recycling of electrical and electronic
equipment.
Disposal must be effectuated in accordance with the environmental
regulations in force for waste disposal.
For more detailed information about treatment, recovery and recycling of
this product, contact the competent public office (Department of Ecology
and Environment), your home household waste disposal service, or the
shop where you purchased the product.
Cut and dispose of the power cord with the plug.
Up until appropriate disposal, do not damage the tubing because they
contain the refrigerant gas.
For the disposal of packing materials, follow local regulations.
WARNINGS:
• Do not install the appliance in a damp or wet location as this could
compromise the insulation and result in leakage
Furthermore, on the exterior of the same, condensate could
accumulate
• Do not place the appliance in locations outside or near sources of
heat or exposed to direct sunlight.
The appliance operates properly within the range of environmental
temperatures indicated:
+10 +32’C for the climatic class SN
+16 +32’C for the climatic class N
+16 +38’C for the climatic class ST
+16 +43’C for the climatic class T
(See the nameplate of the product)
• Do not place containers with liquids on top of the appliance.
• Wait at least 3 hours after final placement before placing the appliance
in operation.
1 Make sure that the space around the refrigerator is adequate
for ventilation. The illustration (fig. 1) shows the minimum space
required for the installation of the refrigerator.
Maintaining a wider space from the wall, results in reduced electrical
energy consumption.
The use of the refrigerator in a space the size less than those
indicated in the illustration below (fig. 1) could result in improper
operation, loud noises and breakdowns.
INSTALLATION
Scrapping old appliance
Conformity
Fig.1
Refrigerator Compartment Fan
(if present)
OPERATION
Fig.4
EN 12
Loading ...
Loading ...
Loading ...