Loading ...
Loading ...
Loading ...
ENGLISH - 35
APPENDIX A: INSTALLATION REFERENCE
Connecting an AC-2 adapter
Your system comes with AC-2 adapters used to connect the front and rear speaker wires
to your speakers. Use this step when it is referenced to set up your system.
1. Using the screwdriver, turn the screws to the left (counterclockwise) to loosen the
wire terminals.
2. Insert the red, stripped end of the two-pin cable marked + into the red + terminal.
3. Insert the black, stripped end of the two-pin cable into the silver terminal.
Note: Be sure to only insert the bare ends of each exposed wire to avoid clamping
the wire’s insulation.
4. Using the screwdriver, turn the screws right (clockwise) to secure the wires into
the terminals.
5. Repeat steps 1 – 4 to connect the other adapter.
Loading ...
Loading ...
Loading ...