Loading ...
Loading ...
Loading ...
27
Projecting
This section describes how to operate the unit to view the picture from the equipment
connected to the unit. It also describes how to adjust the quality of the picture to suit your
taste.
Projecting the
Picture
1 Power on both the unit and the
equipment connected to the
unit.
2 Press INPUT to display the input
palette on the screen.
3 Select the equipment from
which you want to display
images.
Press INPUT repeatedly or press M/m/
(enter) to select the equipment from
which to project.
Tips
• When “Auto Input Search” is set to “On” on
the Function menu, only input terminals
with effective signals are displayed in the
input palette.
• When “Status” is set to “Off” on the Setup
menu, the input palette does not appear.
Press the INPUT button to switch between
input terminals in sequence.
• When the “Control for HDMI” is set to “On”
on the Function menu, the input terminal
with effective signals is automatically
displayed, synchronizing with the operation
of the equipment connected to HDMI 1 or
HDMI 2 input of the unit. (Only when the
connected equipment supports Control for
HDMI compatible.)
Projecting
Example: To view the picture from
the video equipment
connected to the HDMI 1
connector of this unit.
To view the picture from Press INPUT
to display
RGB equipment connected
to the INPUT A connector
Input-A
Component equipment
connected to the Y P
B/CB
P
R/CR connector
Component
Equipment connected to the
HDMI 1 connector
HDMI 1
Equipment connected to the
HDMI 2 connector
HDMI 2
Loading ...
Loading ...
Loading ...