Loading ...
Loading ...
Loading ...
15
INSTALLATION
ENGLISH
Installation Place
Requirements
Before installing the appliance, check the following
information to make sure that the appliance
should be installed in a correct place.
Installation Location
• This appliance must be installed on firm flooring
to minimize vibration during the spin cycle.
Concrete flooring is best, being far less prone to
vibration during the spin cycle than wooden
floorboards or a carpeted surface.
• If it is impossible to avoid positioning the
appliance next to a gas cooker or coal burning
stove, an insulation (850 X 600 mm) covered with
aluminum foil on the side facing the cooker or
stove must be inserted between the two
appliances.
• Ensure that when the appliance is installed, it is
easily accessible for an engineer in the event of a
breakdown.
• When installing the appliance, adjust all four feet
using the transit bolt spanner provided to
ensure the appliance is stable.
Floor Installation
*1 minimum space for installation
To ensure sufficient clearance for water inlet hoses,
drain hose and airflow, allow minimum clearances
on the sides and behind the appliance. Be sure to
allow for wall, door, or floor moldings that may
increase the required clearances.
The faucet is to the REAR when the appliance is
placed.
The faucet is to the SIDE when the appliance is
placed.
WARNING
• This appliance must only be used for domestic
household purposes and should not be used in
mobile applications.
WBA
D
D’
C
HH’
A
30 cm
*1
W70 cm
B5 cm
C20 cm
D77 cm
D'
140 cm
*1
H 189 cm
H' 200 cm
A
15 cm
*1
W70 cm
B5 cm
C10 cm
D77 cm
D'
140 cm
*1
H 189 cm
H' 200 cm
WBA
D
D’
C
HH’
Loading ...
Loading ...
Loading ...