Loading ...
Loading ...
Loading ...
Operating Your Heater
HEATER CONTROL PANEL
1 – Display
2 – Temperature
3 – Heat Setting
4 – Timer
5 – Power
Ensure the power switch is in the OFF position before plugging unit in.
WARNING: Do not use this heater until it is fully assembled according to
the free standing or wall mounting instructions within this manual.
OPERATION
Plug in the unit and switch on the main power switch. The power indicator will light
up.
Press the Power button (5) to turn the unit on. The current room temperature will be
displayed.
HEAT SETTING
Press the Heat Setting button (3) to change between Low and High power.
SETTING THE TEMPERATURE
Press the Temperature button (2) to select the desired temperature from 15-35C.
Each press of the button will increase the temperature by 1 degree until it reaches 35
degrees and then it will start at 15 degrees again. After a few seconds the display will
return to showing the current room temperature.
SETTING THE TIMER
Press the Timer button (4) to set timer. The set time is displayed. Press the Timer
button to increase the timer in one hour increments. The timer has a range of 0-24
hours. The unit will turn off once the timer completes its countdown.
Loading ...
Loading ...
Loading ...