Loading ...
Loading ...
Loading ...
9
BLOWER OPERATION
MAINTENANCE
1 2 3 4 5
1 2 3 4 5
This Wet/Dry Vac has blowing capabilities only when the hose is inserted into the blower port. To use the blower feature
follow the instructions listed.
1. Verify that the power cord is disconnected from the outlet. (g. 1)
2. Disconnect the hose from the vacuum. (g. 2)
3. Undo the latches and remove the power head from the container. (g. 3)
4. Clear all dirt or debris from the container and hose. (g. 4)
5. Clean or replace the lters. (g. 5)
6. Check the hose, attachments, and power cord to verify that they have not been damaged.
IMPORTANT! Clean or change the dust lter regularly for best performance. ALWAYS USE DUST FILTER FOR DRY
VACUUMING. If the machine is used without the dust lter, the motor will burn out and the warranty will be voided.
Always keep spare lters on hand.
1. Verify that the power cord is disconnected from the outlet. (g. 1)
2. Make sure the container is empty before using as a blower.
3. Remove hose from the vacuum port.
4. Insert the larger end of the hose into the blower port on the back side of the power head. (g. 2)
5. Fit the desired attachment to the hose. (g. 3)
6. Ensure the power switch is turned off and plug into the power supply. (g. 4)
7. Before turning on the vac, rmly hold loose end of the hose. Turn the motor on by ipping the switch to the ‘I’ ON
position. (g. 5)
WARNING:
ALWAYS WEAR SAFETY GOGGLES COMPLYING WITH ANSI Z87.1 (OR IN CANADA, CSAZ94.3)
BEFORE USING BLOWER.
WARNING:
KEEP BYSTANDERS CLEAR FROM BLOWING DEBRIS.
WARNING:
WEAR A DUST MASK IF BLOWING CREATES DUST THAT MIGHT BE INHALED.
Loading ...
Loading ...
Loading ...