Loading ...
Loading ...
Loading ...
TV reception problems
No picture / No Signal
• Did you select ‘Australia’ as the country while setting up? If not, you may
have to do a factory reset on the TV by making sure correct country
selection is made this time .
• Is the antenna plugged in properly? Is the antenna cable damaged?
• Is the antenna cable plug firmly connected?
• Have you selected the correct signal source on the TV set?
• Have you already executed a channel search at your present location?
• Are all the connection cables to external signal sources properly
connected?
• Is the connection cable to the external signal source damaged?
• Have you selected the correct signal source on the TV set?
One or group Channels disappears by itself.
• Please rescan the channel again.
• In
TV
mode, press menu button, settings, channel, then turn off the “auto
channel update”.
No sound
• Is the sound muted? Press the button .
• Is the volume turned down? Press the +button .
No colour
• Adjust the colour settings
• Reset the picture settings
Press settings
button, go to picture , select reset to default
• Check the programme is broadcast in colour.
• Check that the channel is tuned properly.
Multimedia playback problems
File is not played back
• Check that the USB mass storage device contains compatible les.
Problems with playback from external devices
No sound
• Check that the audio cable is properly connected or damaged.
• Make sure that you have selected the correct signal source on your TV set.
Sound is distorted or humming
• Clean the connector plugs.
• Replace the connection cable to the external device.
21
Loading ...