Loading ...
Loading ...
Loading ...
14
RC‑1590MKII Stereo Control Amplier
• NETWORK: Shows the network connection status and to view/congure
the network settings. If the network is properly congured and attached
“Connected” will be displayed. To view or modify the network settings
press the ENTER button.
The RC-1590MKII supports both DHCP and STATIC IP addressing. Select
the desired IP address method and press ENTER.
If DHCP is selected you can refresh IP address by pressing ENTER or press
MENU to view IP address information. Press the MENU button to toggle
through IP address settings. If the IP address is renewed the network will
be tested and connection status reported.
If STATIC IP address mode is selected you must congure all settings for the
network including IP Address, Subnet Mask, Gateway and DNS Server. Use
the left/right or +/- buttons to adjust the values and press ENTER to move to
the next value. When the proper IP information is congured press MENU
to go to the next setting. After entering the STATIC IP address information
the network will be tested and connection status reported.
NOTE: For more information regarding network connection please
contact your authorized Rotel dealer.
NOTE: A network connection is not required for the RC-1590MKII to
operate.
• MAIN: This shows the current software version loaded into the RC-
1590MKII. The software can be updated if the RC-1590MKII is properly
connected to the Internet.
• Press ENTER to check if a new software version is available.
• If a new software version is available press the + button on the front
panel or the right button on the remote control to select YES then press
ENTER button to begin the software update process.
• The new software will be downloaded from the Internet. The
RC-1590MKII will power cycle when the software update is complete.
NOTE: Do NOT power off the RC-1590MKII during the software
update process.
NOTE: It is recommended to Reset Factory Defaults after the software
update is complete.
• PC-USB: This shows current loaded software version for PC-USB processor.
• SIGNAL SENSE: Check if an audio signal is present on the congured
Signal Sense input. The RC-1590MKII monitors the data stream to
determine if there is audio. If there is no audio detected for 10 minutes,
the RC-1590MKII will enter Signal Sense Power Mode. When in Signal
Sense Power Mode and the RC-1590MKII detects audio on Signal Sense
input, the unit will automatically power on. To disable this function, select
the OFF option which is the factory default setting.
NOTE: When the SIGNAL SENSE function is activated, the RC-1590MKII
will consume additional power in signal sense standby mode.
NOTE: Due to local power consumption regulations the SIGNAL SENSE
function is not available in all markets.
NOTE: When the POWER OPTION is congured to Quick, the RC-1590MKII
will consume additional power in standby mode.
NOTE: Due to local power consumption regulations the POWER
OPTION function is not available in all markets.
• AUTO POWER OFF: The RC-1590MKII can be congured to automatically
power off if unused for a specied period. If no changes are made to the
unit within the specied “Auto Power Off” timer the unit will automatically
go to STANDBY mode. The Auto Power Off timer will be restarted if
changes are made to the volume, source or playback. The default for
Auto Power Off is set to 20 MINS.
Valid settings include: 20 MINS (Default), DISABLE, 1 HOUR, 2 HOURS,
5 HOURS, 12 HOURS.
• FIXED GAIN: Congures a Fixed Volume level for a specied input. To
enable this feature press the +/- buttons on the front panel to select the
desired xed volume level for Aux, FUSB, PC-USB, Coax 1, Coax 2,
Optical 1, Optical 2 or Bluetooth. When enabled and the input with a
Fixed Volume is selected, the Volume level will immediately be set to the
specied level.
Valid settings include: VARIABLE, FIXED 01-95, FIXED MAX.
• AUX VOL: VARIABLE (disabled) is factory default.
• FUSB VOL: VARIABLE (disabled) is factory default.
• PC-USB VOL: VARIABLE (disabled) is factory default.
• OPT1 VOL: VARIABLE (disabled) is factory default.
• OPT2 VOL: VARIABLE (disabled) is factory default.
• COAX1 VOL: VARIABLE (disabled) is factory default.
• COAX2 VOL: VARIABLE (disabled) is factory default.
• BLUETOOTH VOL: VARIABLE (disabled) is factory default.
NOTE: The Volume knob on the front panel and Volume +/- buttons
on the IR remote are disabled when the volume is Fixed. To disable this
feature set the Fixed Volume level to “Variable”.
• PC-USB AUDIO CLASS: Changes supported PC-USB Audio Class of the
attached device.
NOTE: Some computers attached to the PC-USB do not support USB
Audio Class 2.0 and do not support 32/ 384 audio playback. If needed
the PC-USB can be congured for USB Audio Class 1.0. Please consult
your computer operating system for details.
• PC-USB AUDIO MODE: Change PC-USB Audio mode to support MQA
and PCM Audio up to 24 bits or PCM Audio Only up to 32 bits. When
PCM 32B is selected MQA audio is not supported. To playback MQA
the MQA/24B option must be selected.
Valid settings include: MQA/24B (Default), PCM 32B.
Loading ...
Loading ...