Loading ...
Loading ...
Loading ...
Clutch System
Servicing Your Honda 77
1. Drain the engine oil (page 64).
2. Remove the four right crankcase over cover
bolts (1) and over cover (2).
3. Remove the six clutch cover bolts (3) and
clutch cover (4).
4. Remove the six clutch spring bolts and springs
(5).
Loosen the bolts in a crisscross pattern in two or
three progressive steps.
5. Remove the clutch pressure plate (6).
6. Remove the clutch lifter (7) first, then remove
the clutch lifter rod (8).
7. Check the operation of the thrust bearing (9)
built in clutch lifter with your finger. The
bearing should turn smoothly and quietly.
If the operation is not smooth, refer to an official
Honda Service Manual (page 182) for bearing
disassembly or see your dealer.
8. Remove the seven clutch discs, six clutch
plates, judder spring and spring seat (10).
Clutch Disc/Plate Removal
(1) bolts (2) over cover
(3) clutch cover bolts (4) clutch cover
(1)
(2)
(3)
(4)
(5) clutch spring bolts and springs
(6) clutch pressure plate
(7) clutch lifter (8) clutch lifter rod
(6)
(5)
(8)
(7)
(9) thrust bearing
(10) clutch discs, clutch plates, judder spring and spring
seat
(9)
(10)
31MKE710.book77ページ２０１９年３月１１日 月曜日 午前１０時４７分
Loading ...
Loading ...
Loading ...