Loading ...
Loading ...
Loading ...
Fuel System
(cont’d)
Servicing Your Honda 57
5. Install the setting rubber (5), clamp (6) and bolt
(7) by aligning the clamp tab (8) with the
groove (9) of the stay.
Tighten the bolt securely.
6. Install the fuel tank (page 47).
7. Increase the fuel pressure (page 62).
Empty the fuel tank into an approved gasoline
container using a commercially available hand
siphon or an equivalent method.
Be careful not to damage the fuel pump while
draining the fuel in the fuel tank.
Removal
1. Remove the fuel tank (page 45).
2. Remove the fuel pump mounting nuts (1), fuel
pump mounting cap nut (2), stopper cable
guide (3), washer (4), collars (5), conical
spring washers (6) and fuel pump plate (7)
while holding the fuel tank.
(5) setting rubber (8) clamp tab
(6) clamp (9) groove
(7) bolt
(6)
(7)
(5)
(9)
(8)
Fuel Pump Filter Replacement
WARNING
Gasoline is highly flammable and
explosive. You can be burned or seriously
injured when handling fuel.
• Stop the engine and keep heat, sparks
and flame away.
• Handle fuel only outdoors.
• Wipe up spills immediately.
(1) fuel pump mounting nuts
(2) fuel pump mounting cap nut
(3) stopper cable guide
(4) washer
(5) collars
(6) conical spring washers
(7) fuel pump plate
(5)
(7)
(4)
(3) (2) (1)
(6)
31MKE710.book57ページ２０１９年３月１１日 月曜日 午前１０時４７分
Loading ...
Loading ...
Loading ...