Loading ...
Loading ...
Loading ...
7．OSC: Pressing the ‘OSC’ button will allow the heater to oscillate. To stop the oscillation,
press the ‘OSC’ button once more. (Auto oscillation is 70 degrees and manual oscillation is
60 degrees). (FIGURE 5)
8． TIMER: The timer function allows you to set the length of operation from 0.5 hour to 7.5
hours. Pressing the ‘TIME’ button will increase the length of operation by 0.5 hour each time.
(As shown in FIGURE 6)
9. To turn the heater off, press the ‘POWER’ button, and the unit will work in the COOL FAN
MODE for 30 second then turn off by itself.
REMOTE CONTROL
1. Install two “AAA” batteries as shown in FIGURE 7.
2. The Remote Control Power button is labeled as such. All the functions performed with the
Remote Control work identically to the Manual Controls.
SAFETY FEATURES
1. A thermal overload protector is built in to prevent overheating.
2. When an overheat temperature is reached, the heater will be automatically shut off. It can
only resume operation when the user resets the unit. (See reset instruction below)
3. If the unit is tilted, a safety system will automatically cut off the power, put the unit in a
vertical position and it will operate again.
To Reset Heater:
1. Unplug the heater and wait 5-10 minutes for the unit to cool down.
2. Then, turn on the unit again and operate normally.
4
Loading ...
Loading ...