Loading ...
DECORA SMART
TM
FEATURES
Decora Smart
TM
products contain unique features which can be configured via the
My Leviton App.
Locator LED Setup:
Leviton Decora Smart
TM
Plug-in Modules have a locator LED built into the control
button. The LED can be used to locate the module in the dark, indicate the current
load status or can be turned OFF at all times.
• Status Mode: Use the LED to show the current state of the light. If the load is
currently ON, the LED is ON, if the load is currently OFF, the LED is OFF.
• Locator Mode (default): Use the LED to help find the switch in a dark room. If the
load is currently OFF, the LED is ON, if the load is currently ON, the LED is OFF.
• LED OFF: Place the LED in the permanently OFF state.
DI-000-DW15A-02A© 2017 Leviton Mfg. Co., Inc.
FOR CANADA ONLY
For additional information, contact Leviton’s Techline at
1-800-824-3005 or visit Leviton’s website at www.leviton.com
For warranty information and/or product returns, residents of Canada should contact Leviton in writing at Leviton Manufacturing of Canada Ltd to the attention of the Quality Assurance Department, 165
Hymus Blvd, Pointe-Claire (Quebec), Canada H9R 1E9 or by telephone at 1-800-405-5320.
This device complies with Part 15 of the FCC Rules. Operation is subject to following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation of the device.
This equipment has been tested and found to comply with the limits for a Class B Digital Device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment OFF and ON, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving Antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/tv technician for help.
FCC CAUTION
Any changes or modifications not expressly approved by Leviton Manufacturing Co., Inc., could void the user's authority to operate the equipment.
FCC COMPLIANCE STATEMENT
Copyright and Trademark Information
Decora is a registered trademark of of Leviton Manufacturing Co., Inc. Use herein of other third party trademarks, service marks, trade names, brand names and/or product names are for informational
purposes only, are/may be the trademarks of their respective owners; such use is not meant to imply affiliation, sponsorship, or endorsement. No part of this document may be reproduced, transmitted or
transcribed without the express written permission of Leviton Manufacturing Co., Inc.
This product is covered by U.S. Patent No. 8,664,886 and corresponding foreign patents.
IC COMPLIANCE STATEMENT
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any
interference, including interference that may cause undesired operation of the device.
LIMITED 5 YEAR WARRANTY AND EXCLUSIONS
Leviton warrants to the original consumer purchaser and not for the benefit of anyone else that this product at the time of its sale by Leviton is free of defects in materials and workmanship under normal and proper use for five years from the
purchase date. Leviton’s only obligation is to correct such defects by repair or replacement, at its option. For details visit www.leviton.com or call 1-800-824-3005. This warranty excludes and there is disclaimed liability for labor for removal
of this product or reinstallation. This warranty is void if this product is installed improperly or in an improper environment, overloaded, misused, opened, abused, or altered in any manner, or is not used under normal operating conditions or not in
accordance with any labels or instructions. There are no other or implied warranties of any kind, including merchantability and fitness for a particular purpose, but if any implied warranty is required by the applicable jurisdiction, the duration
of any such implied warranty, including merchantability and fitness for a particular purpose, is limited to five years. Leviton is not liable for incidental, indirect, special, or consequential damages, including without limitation, damage
to, or loss of use of, any equipment, lost sales or profits or delay or failure to perform this warranty obligation. The remedies provided herein are the exclusive remedies under this warranty, whether based on contract, tort or otherwise.
If the Plug-In Module appears to be functioning improperly, proceed with the
following steps:
1. Confirm that the module is being supplied from a 120V, 60Hz AC source ONLY.
2. Confirm that the Load being controlled is in proper working order (local switch is ON)
and check for burned-out bulbs.
3. Confirm that the load being controlled does not exceed the 15A module limit.
4. Confirm that the unit is programmed properly.
TROUBLESHOOTING
OPERATION
• The Plug-in Module can manually control the load.
• With the load ON, tap the control button to turn the load OFF.
• With the load OFF, tap the control button to turn the load ON.
Control Button and
locator LED
FACTORY DEFAULT
In situations where a Plug-in Module needs to be returned to factory default follow the
following steps:
• Hold the control button for a total of 14 seconds.
- After the first 7 seconds the LED turns amber.
- Continue to hold the control button until the Locator LED quickly flashes
red/amber.
• Release the control button and the Plug-in Module will reset.
GETTING STARTED
Leviton Wi-Fi
®
devices use the my.Leviton.com cloud service to provide
connectivity from your mobile device when you are home or away. If this is your
first Leviton Wi-Fi
®
device, use the My Leviton app or browse to my.Leviton.com
and setup a free account.
DECORA SMART
TM
Wi-Fi
®
SETUP
Leviton Wi-Fi
®
devices are compatible with the My Leviton App and my.Leviton.com
cloud service. The app is used to pair your device with your Wi-Fi
®
network, customize
your device configuration and provide communication via my.Leviton.com. To control
the Leviton Wi-Fi
®
device it will need to be added to a Wi-Fi
®
network with Internet
access:
• Download the My Leviton App.
• Ensure the Leviton accessory is properly wired and power is applied.
• Upon initial power-up the Locator LED will flash green to show the accessory is ready
to be configured.
• If the Locator LED is no longer flashing green when you are ready to add the
accessory, press and hold the paddle for 7 seconds until the Locator LED turns
amber and release.
• Within the app follow the on screen instructions or press + to add the device to the
Wi-Fi
®
network and my.Leviton.com account.
• Leviton Wi-Fi
®
devices support Wi-Fi
®
802.11 a/b/g/n networks @ 2.4GHz and 5GHz
with WPA or WPA2 security.
CHANGING NETWORK CONFIGURATION
In situations where a wireless access point or password is changed but the configuration of
the dimmer needs to remain, use the following changing network procedure:
• Press and hold the control button for 7 seconds until the Locator LED turns amber and
release.
• The locator LED will flash green.
• Open the My Leviton App.
• Navigate to the device.
• On the device page select Details.
• Within the Details section choose Reconfigure Wireless and follow the app instructions.
WEB VERSION