Loading ...
Loading ...
Loading ...
Accessories
Replacement parts and accessories may
be purchased at a store near you or on our
website www.philips.com/store.
Assistance
For assistance, visit our website:
www.philips.com/support or call toll free
1-800-243-3050.
Online information is available 24 hours
a day, 7 days a week.
Disposal
- This product contains a rechargeable
lithium-ion battery which must be
disposed of properly (Fig. 28).
Contact your local town or city ocials
for battery disposal information.
You can also call 1-800-822-8837 or
visit www.call2recycle.org for battery
drop-o locations.
- For assistance, visit our website
www.philips.com/support or call
1-800-243-3050 toll free.
- Your product is designed and
manufactured with high quality
materials and components, which can
be recycled and reused. For recycling
information, please contact your local
waste management facilities or visit
www.recycle.philips.com
Full Two-Year Warranty
Philips Electronics North America
Corporation warrants this new product
(except foil, cutters and guards) against
defects in materials or workmanship for
a period of two years from the date of
purchase, and agrees to repair or replace
any defective product without charge.
IMPORTANT: This warranty does not
cover damage resulting from accident,
misuse or abuse, lack of reasonable
care, the axing of any attachment not
provided with the product or loss of parts
or subjecting the product to any but the
specied voltage or batteries.*
Cleaning the nose trimmer
Clean the nose trimmer immediately after
use and when a lot of hair or dirt has
accumulated on the nose trimmer head.
1 Rinse the nose trimmer head with hot
water (Fig. 24).
2 Turn on the product and rinse the nose
trimmer head once more to remove
any remaining hairs. Then turn o the
product again.
For a thorough clean, immerse the nose
trimmer head in a bowl with warm water
for a few minutes and then turn on the
product to remove stubborn hair/debris.
3 Carefully shake o excess water and let
all parts air dry completely.
Cleaning the precision shaver
1 Hold the precision shaver at the
grooves on each side and pull the top
part o the bottom part (Fig. 25).
2 Blow and/or shake out any hair that
has accumulated inside the precision
shaver (Fig. 26).
3 Clean the top part of the precision
shaver under a warm tap (Fig. 27).
4 Carefully shake o excess water and let
all parts air dry completely.
5 Reattach the top part onto the bottom
part of the precision shaver.
This product has no other user-
serviceable parts. For assistance call
1-800-243-3050.
Storage
- Store the product in the pouch
supplied. Make sure the product is dry
before you store it in the pouch.
- Be sure the product is turned o.
Remove cord from outlet and the
product before storing it in a safe, dry
location where it will not be crushed,
banged, or subject to damage.
- Do not wrap cord around the product
when storing.
- Store cord in a safe location where it
will not be cut or damaged.
- Do not place or store the product where
it can fall or be pulled into a tub or sink,
water or other liquid while plugged in.
Cleaning
Never use scouring pads, abrasive
cleaning agents or aggressive liquids
such as gasoline or acetone to clean
the product.
Never dry the trimmer teeth with a
towel or tissue, as this may damage the
trimmer teeth.
After every use: cleaning under the tap
1 Turn o the product and disconnect
from the power outlet.
2 Remove any guard (see `Attaching and
detaching guards`) or cutting element
(see `Detaching and attaching cutting
elements`) from the product.
3 Rinse the hair chamber under a warm
tap.
4 Clean the cutting element and guard
under a warm tap (Fig. 23).
5 Carefully shake o excess water and let
all parts air dry completely.
Thorough cleaning
1 Turn o the product and disconnect
from the power outlet.
2 Wipe the handle of the product with
a dry cloth.
3 Remove any guard (see `Attaching and
detaching guards`) or cutting element
(see `Detaching and attaching cutting
elements`) from the product.
4 Remove any hairs that have
accumulated in the hair chamber with
the cleaning brush supplied.
5
Remove any hairs that have accumulated
in the cutting elements and/or guards
with the cleaning brush supplied.
6 Clean the cutting elements under a
warm tap (Fig. 23).
7 Clean the guards under a warm tap.
8 Carefully shake o excess water and let
all parts air dry completely.
Nose trimmer
Use the nose trimmer to trim your nose
hair and ear hair.
- Make sure nasal passages are clean.
Make sure outer ear channels are clean
and free from wax.
- Do not insert the tip more than 3/16in
(0.5cm).
- Always clean the attachment after each
use.
Trimming nose hair
1 Gently move the tip in and out of nose
while turning it around to remove
unwanted hairs (Fig. 21).
Trimming ear hair
1 Slowly move the tip round the ear to
remove hairs that stick out beyond the
rim of the ear.
2 Gently move the tip in and out of the
outer ear channel to remove unwanted
hairs (Fig. 21).
Precision shaver
Use the precision shaver after trimming, to
shave unwanted hairs on cheeks, chin and
along the beard with precision. Make sure
to pre-trim your beard rst, with the full-
size hair trimmer without guard, to obtain
the best result.
Note: Use the precision shaver to remove
remaining hairs and detailing your beard
style. It is not suitable for a full face shave.
1 Gently press the precision shaver onto
the skin and shave along contoured
edges to remove any unwanted hairs
(Fig. 22).
Loading ...