Loading ...
Loading ...
Loading ...
4
CAUTION: the safety precautions are part of the appliance. Read
them carefully before using your new appliance for the first time. Keep
them in a place where you can find and refer to them later on.
DESCRIPTION
A Pusher
B Feed tube
C Cover
D Sieve
E Juice collector
F Pouring spout
G Pulp collector
H Safety clamp
I Control knob (2 speeds)
J Drive shaft
K Motor unit
L Juice jug
M Cleaning brush
N Foam separator
SAFETY SYSTEM
This appliance is fitted with a safety mechanism. To start the juice
machine, the cover (C) must be properly secured by the safety clamp (H).
Opening the safety clamp (H) will stop the juice machine. At the end of
a cycle, place the control knob (I) to 0 and wait until the sieve (D) stops
completely before removing the cover.
BEFORE FIRST USE
• We recommend that you wash all the removable parts (A, B, C, D, E, G,
L) in warm soapy water (see paragraph “Cleaning”). Rinse and dry them
carefully.
• Unpack the appliance and place it on a clean, dry stable flat work
surface away from water splashes.
• Ensure that all packaging has been removed before starting the
appliance.
USING THE APPLIANCE
• Place the juice collector (E) on the body of the appliance (see Fig. 1).
• Place the sieve (D) in the juice collector (E). Ensure that the sieve is
properly clipped onto the drive shaft (J) (see Fig. 2).
• Fit the pulp collector (G) on the rear of the appliance (see Fig. 3).
• Fit the cover (C) on the appliance, spout to the rear (see Fig. 4).
Loading ...
Loading ...
Loading ...