Loading ...
Loading ...
Loading ...
54
PROGRAMMING MODE - SETUP MODE
NOTE
• This function can be set only at the machine. It cannot be managed via the setup card.
(It is not applied in setup card.)
Entering set up
mode.
You will see LqC1
Button Display
Press the
Hot
button.
Press the
Warm
or the
Cold
button until
appears
in the display.
Press the
Start
button.
Press the
Warm
or the
Cold
button until
appears
in the display.
Press the
Start
button.
Press
Warm(+)
or
Cold(-)
button and then select
or or
237 [KHz] 235 [KHz] 230 [KHz]
One or the other will
display.
Press the
Start
button.
The machine sets up the value of water level, then
advances to the next process automatically.
1. Continue to set up the next mode.
2. Stop the change of setup value and go back to ready
mode.
• Coin type – Turn on/off toggle switch.
• Card type – Insert the service card.
• OPL type – Push the Hot button twice.
22. How to change the water level
You can change the water level by selecting two options.
1. Lo indicate water level 237 [KHz]
2. Idd indicate water level 235 [KHz]
2. HI indicate water level 230 [KHz]
E
Loading ...
Loading ...
Loading ...