Loading ...
Loading ...
Loading ...
Replacing the dustbag
◗ Replace the dustbag as soon as the dustbag-full indicator has turned red permanently,i.e.
even when the nozzle is not placed on the floor (fig.18).
1 Switch the vacuum cleaner off.
2 Open the cover (fig.19).
3 Push the dustbag holder backwards (fig.20).
4 Remove the full dustbag by pulling the cardboard tag (fig.21).
When you do this,the dustbag is sealed automatically.
5 Slide the cardboard tag of the new dustbag into the two grooves of the dustbag holder as far
as possible (fig.22).
6 Pull the dustbag holder forwards.You will hear a click (fig.23).
B
You cannot close the cover if no dustbag has been inserted.
B
Philips s-bag` double-layer paper dustbags are available under type number FC8021.
Cotton dustbag
◗ If provided,you can use the cotton dustbag instead of paper dustbags.The cotton dustbag can
be used and emptied repeatedly.To insert and remove the cotton dustbag,simply follow the
instructions for replacing paper dustbags.
To empty the cotton dustbag:
1 Hold the dustbag over a dustbin.
2 Remove the clip by sliding it off the dustbag sideways (fig.24).
3 Shake out the contents (fig.25).
4 Close the dustbag by sliding the clip back onto the bottom edge of the dustbag (fig.26).
B
When using the cotton dustbag we advise you to wash the Motor Protection Filter once a year
in lukewarm water.Make sure the filter is completely dry before reinserting it into the vacuum
cleaner.
Motor Protection Filter
◗ This appliance is equipped with a greatly improved,triple-layer permanent Motor Protection
Filter that guarantees optimal protection of the motor.This filter does not need to be
replaced.
B
This means that you can simply throw away the replacement filter supplied in each new box of
dustbags, since this filter is only required for older versions of this vacuum cleaner.
◗ All you have to do is shake the permanent filter over a dustbag and reinsert it into the
vacuum cleaner every time you put in a new dustbag.
1 Slide the filter holder out of the vacuum cleaner (fig.27).
2 Remove the filter from the holder and shake it over a dustbin.
3 Put the filter back into the holder as it was previously placed and press it firmly (fig.28).
4 Push the holder with the clean filter firmly into place to ensure that it fits properly at the
bottom (fig.29).
ENGLISH8
Loading ...
Loading ...
Loading ...