Loading ...
Loading ...
Loading ...
Keep page 3 and 78 open when reading these instructions for use.
Environment
◗ To make recycling possible,the plastics used for this appliance have been coded.
◗ The cardboard packaging has been made of recycled material and is fully recyclable.
Important
Read these instructions for use carefully before using the appliance and save them for future
reference.
◗ Make sure the dustbag has been placed correctly before using the vacuum cleaner for the
first time.
◗ Never use the vacuum cleaner to suck up water or any other liquid.Never suck up
flammable substances and do not suck up ashes until they are cold.
◗ When the vacuum cleaner is used to suck up fine dust,the pores of the dustbag may become
clogged,causing the passage of air through the dustbag to become obstructed.As a result,the
dustbag-full indicator will indicate that the dustbag needs to be replaced,even though the
dustbag is not full at all.
◗ Never use the vacuum cleaner without the Motor Protection Filter.This could damage the
motor and shorten the life of the appliance.
◗ Only use:
- Philips s-bag` double-layer paper dustbags (type FC8021);
- Sydney+ double-layer paper dustbags (type HR6999 Sydney+);
- or the cotton dustbag provided (some types only).
◗ If the mains cord or another part of this appliance is damaged,it may only be replaced by
Philips or a service centre authorised by Philips,as special tools and/or parts are required
and in order to avoid hazardous situations.
◗ Noise level:Lc = 77,5 dB(A)
B
Please note that * in the figure numbers means that this figure applies to specific types only.
Connecting and disconnecting accessories
Hose
1 To connect the hose,insert it into the opening in the vacuum cleaner (fig.1).
2 Turn the hose clockwise (fig.2).
3 To disconnect the hose,turn it anticlockwise (fig.3).
Tube
1 To connect the tube to the handgrip and to connect the nozzle to the tube,insert the
narrow section into the wide section while turning a little (fig.4).
Telescopic tube (specific types only)
1 To adjust the telescopic tube to the required length,grasp the plastic ring and pull the upper
tube upwards as far as necessary.Lock the telescopic tube in position by releasing the plastic
ring (fig.5).
ENGLISH6
Loading ...
Loading ...
Loading ...