Loading ...
Loading ...
Loading ...
Tire Puncture u Removing Wheels
90
Troubleshooting
12.
Move the wheel to the right to separate
it from the final drive gear case.
13.
Remove the wheel and side collar.
u Support the brake caliper assembly so
that it doesn’t hang from the brake
hose. Do not twist the brake hose.
u Avoid getting grease, oil, or dirt on
the disc or pad surfaces.
u Do not push the brake pedal while the
brake caliper is removed.
Installation
Before installing the wheel, check that the
wheel hub and final drive gear splines are
coated with molybdenum disulfide paste.
1.
Position the wheel between the
swingarm and the final drive gear case.
u Be sure the splines on the wheel hub
fit into the final drive gear case.
2.
Install the side collar into the wheel hub.
3.
Install the rear brake bracket and rear
brake bracket bolt.
u To avoid damaging the brake pads
while setting the brake caliper
assembly over the brake disc, carefully
fit the brake disc between the pads.
4.
Push the rear axle shaft from the left
side, through the final drive gear case
wheel hub, rear brake bracket.
Recommended molybdenum disulfide
paste:
(USA only) Pro Honda Moly 60 paste or
equivalent
Loading ...
Loading ...
Loading ...