Loading ...
Loading ...
Loading ...
Final Drive Oil u Changing Final Drive Oil
70
Maintenance
Changing Final Drive Oil
1.
Place your motorcycle on the side stand
on a level surface.
2.
Place a drain pan under the drain bolt.
3.
Remove the oil fill hole cap, drain bolt,
and sealing washer to drain the oil.
4.
Install a new sealing washer onto the
drain bolt. Tighten the drain bolt.
5.
Fill the final gear with the recommended
oil. 2 P. 48
6.
Check the oil level. It should be flush
with the lower edge of the oil fill hole.
7.
Reinstall the oil fill hole cap and tighten.
8.
Check that there are no oil leaks.
Oil fill hole cap
Lower edge
Sealing washerDrain bolt
Torque: 9 lbf·ft (12 N·m, 1.2 kgf·m)
Required oil: 4.4 US oz (130 cm
3
)
Torque: 9 lbf·ft (12 N·m, 1.2 kgf·m)
Loading ...
Loading ...
Loading ...