Installation Manual
True HEPA Air Purifier
2. Touch On/Off button to switch on the appliance.
» The appliance operates under the auto mode and fan speed 1 by default.
» After measuring the air quality for a short time, the air quality sensor automatically selects the color of
the air quality light.
» The current fan speed may change automatically.
3. Touch On/Off button again to switch off the appliance.
Changing the Fan Speed
There are several fan speeds available.
You can choose the Sleep Mode, Turbo Mode, Auto Mode, Speed 1, 2 or 3.
Touch the “Speed / Mode” button to select the mode and speed you want.
Setting the Timer
Setting the Child Lock
1. Touch and hold the “Child Lock” button for several seconds to activate child lock.
» ”Beep” sounds and light’s up indicates the child lock is activated.
» When the child lock is on, all the other buttons are not responsive.
2. Touch and hold the “Child Lock” button for several seconds again to deactivate child lock.
Features & Functions
●Simple yet elegant design.
●Turbo, automatic and sleep mode.
●Pre-Filter: blocks hair, paper and other particles.
●HEPA Filter: removes smoke, bacteria, pollen, and airborne particles.
●Activated Carbon Filter: removes formaldehyde and benzene.
Care and Maintenance
1. Clean the air purifier with a soft and clean cloth; Do not use alcohol, oil, benzene to clean the
appliance.
2. HEPA filter needs to be cleaned or replaced periodically.
» After 2,000 hours of use, the filter indicator light on the “Filter Reset” button flashes, which indicates that
the
filter need to be replaced.
» After replacing the filter, press the “Filter Reset” button to remove the accumulated time of the filter.
Replacing the Filter Product Overview
Terminology:
Control Panel
EN-2
EN-3
EN-4
1H
2H
4H
1
Sleep
Filter Reset
Child Lock
Timer
Speed/ Mode
Turbo
Auto
2
3
8H
No
A
B
C
D
E
Description
Timer
Child Lock
On/Off
Filter Reset
Speed / Mode
Function
Switch on/off the appliance
Three fan speeds, three modes
Air Quality Indicator
Air quality light color
Green
Yellow
Red
Air quality level
Good
Moderate
Bad
Using the Appliance
Getting Started
Installing Filter
Before using the appliance, remove all packaging materials of the filter and place the filter into the
appliance as described below.
2.Pull the tag of the filter to remove the filter from the appliance.
1. Pull the upper part of the front panel to remove it from the
appliance.
3. Remove all packaging materials of the filter.
EN-5 EN-6 EN-7 EN-8
Note
Make sure that the side with the tag is pointing towards you.
5. Mount the panel onto the bottom of the appliance first.
Then, push the panel against the body of the appliance.
Switching On and Off
1. Put the plug of the appliance in the power socket.
1. Pull the upper part of the front panel to remove it from the
appliance.
2. Pull the tag of the filter to remove the filter from the appliance.
3. Put back the new filter without packaging into the appliance,
and make the tag of the filter pointing towards to you.
4. Mount the panel onto the bottom of the appliance first.
Then, push the panel against the body of the appliance.
Note
After replacing the filter, press the “Filter Reset” button to remove the
accumulated time of the filter and have no problems to continue using.
Cautions
1. Always place and use the appliance on a dry, stable, level, and horizontal surface.
2. Do not let water or any other liquid or flammable detergent enter the appliance to avoid
electric shock and/or a fire hazard.
3. Do not clean the appliance with water, any other liquid, or a (flammable) detergent to
avoid electric shock and/or a fire hazard.
4. Use indoors only. Avoid direct sunlight or rain.
5. Do not use the appliance near gas appliances, heating devices or fireplaces.
When Not in Use
Caution
1. Do not block the air inlet or outlet of the appliance.
2. Use this air purifier only at 120V.
3. Keep the air purifier far away from heating appliance.
4. Neither improvement nor replacement of the air purifier is allowed after dis-assembly.
5. Always unplug the appliance after use and before cleaning or carrying out other
maintenance.
6. If you need to move the appliance, disconnect the appliance from the power supply first.
7. Keep in mind to open back case of appliance after the appliance stops working for 3
minutes.
8. Do not sit or stand on the appliance, which may lead to potential injury.
9. Keep power cord in good state in order to regular working.
During Use
Caution
Problem Cause
Be sure to check the air purifier after using for a long time.
Trouble Shooting
The appliance does not work even
though it is switched on.
The appliance makes a loud noise.
Power cord is not plugged in.
Fuse is broken.
Power outage.
Front panel is not installed correctly in place.
The appliance is not placed well, or is skewed.
Place on uneven floor.
Filter is clogged or needs to be replaced.
Air inlet is blocked.
If There is a burnt smell Please cut off the power, unplug power cord, and contact us.
Specifications:
1
2
A B DC E
EN-1
filter
Front panel
Control panel
Handle
Air outlet
Power cord
Product name
Product model
Power supply
Rated power
N.W/G.W
Air Purifier
A300
70W
5.2/6.4kg
120V~/60Hz
Dear customers
Thank you for purchasing our air purifier. Please read the user manual
carefully before assemble and use. This manual will ease your operation
steps and save your precious time, taking convenience to you. Take good
care of this manual for your later references. If you have any problems about
the air purifier, do not heasitate to contact with us. We’ll devote ourselves to
continuous innovation and improvement of our products in order to meet
customers’ demands. Product design and/or specification may be amended
without prior notice.
When it is on, it can automatically correspond to the PM2.5 oftheair at your home. It mainly detects
PM2.5, not all kindsof air pollution. For example, when on the haze or fog day, the PM2.5 of air would
be pretty high, which is unhealthy for our breath. And the sensor light would show yellow or red.
Touch the “Timer” button to choose the number of hours you want the appliance to operate.
To deactivate the timer, touch the “Timer” button repeatedly until light is off.
4. Put back the filter without packaging into the appliance,
and make the tag of the filter pointing towards to you.
24-HOUR
Professional Customer Service
30-DAY
100% Money Back Guarantee
Worry-free Warranty
Scan It and Extension Guarantee
1-YEAR
Dear customer,
Thank you so much for choosing Aiibot product. Your suggestions are
valuable for us, you can input your email to contact us from our official
website. We really care about your using experience. In rewards, we
prepared free gifts and chances of extension guarantee. If you have any
problems or confusion, please don’t hesitate to contact us:
GUARANTEE
: Aiibot
: aiibot_store
STOP
Having Trouble? Not Satisfied?
Contact us via the following waos
PLEASE DO NOT USE the product if you found problem in the items you
received.
PLEASE DO NOT RETURN this product before contacting our service team.
PLEASE contact with us immediately.
Aiibot promises you a satisfying solution. Your satisfaction is always our
pursue.
: Aiibot
: aiibot_store