Loading ...
Loading ...
Loading ...
32 MAINTENANCE
CAUTION
• Always separate the nozzle from the product
body or remove the battery before cleaning. If
the nozzle starts to operate during cleaning, it
could cause an injury.
• Keep fingers away from pinch points when
assembling the nozzle on the appliance or the
rotating brush on the nozzle.
• Do not use the rotating brush as a wet mop. It
may cause product damage.
Cleaning the Slim Hard Floor Nozzle
1 Press the nozzle release button a to remove
the nozzle from the extension pipe or product
body.
2 Turn the nozzle upside down and remove the
rotating brush while holding down the PUSH
button on the nozzle.
3 Attach the crevice tool to the product body
and use the vacuum to remove foreign
objects and dust from the brush and the
bottom of the nozzle.
4 Use a damp towel or cloth to remove any
remaining foreign objects and dust from the
brush and the bottom of the nozzle.
• Remove foreign objects from the rollers of
the nozzle using tweezers.
• Do not rinse or submerge the rotating
brush or nozzle in water.
• Wrap the handle of the cleaning brush with
a wet towel or cloth and use it to clean the
rotating brush and nozzle.
5 Slide the brush back into the nozzle until it
clicks into place.
Cleaning the Universal Nozzle
Clean the brush and roller heads before each use.
• If the brush contains foreign objects, the brush
may not spin or a noise may occur during
operation.
1 Press the nozzle release button a to remove
the nozzle from the extension pipe or product
body.
2 Turn the nozzle upside down and rotate the
cover lock slot
b counterclockwise.
3 Pull the brush cover forward and pull the
brush out.
us_main.book.book Page 32 Thursday, August 20, 2020 4:39 PM
Loading ...
Loading ...
Loading ...