Loading ...
Loading ...
Loading ...
21
Clicking noise before the compressor starts.
Clicking noise when you get the water.
The motor running noises when you get ice.
Other unusual noises are due to the reasons below and may
need you to check and take action:
The cabinet is not level.
The back of appliance is touching the wall.
Bottles or containers have fallen or are rolling.
The motor runs
continuously
It is normal to frequently hear the sound of the motor, it will
need to run more when in following circumstances:
Temperature setting is set colder than necessary
Large quantity of warm food has recently been stored within
the appliance.
The temperature outside the appliance is high.
Doors are kept open too long or too often.
After installing the appliance or it has been switched off for a
long time.
A layer of frost occurs in
the compartment
Check that the air outlets are not blocked by food and ensure
food is placed within the appliance to allow sufficient
ventilation. Ensure that door is fully closed. To remove the
frost, please refer to the“Cleaning and Care” chapter.
Temperature inside is
too warm
You may have left the doors open too long or too frequently; or
the doors are kept open by some obstacle; or the appliance is
located with insufficient clearance at the sides, back and top
Temperature inside is
too cold
Increase the temperature by following the “Display Controls”
chapter.
Doors can’t be closed
easily
Check whether the top of the refrigerator is tilted back by
10-15mm to allow the doors to self-close, or if something inside
is preventing the doors from closing.
The light is not working
The LED light may be damaged. Refer to replace LED lights
in“ Cleaning and Care” chapter.
The control system has disabled the lights due to the door
being kept open too long. Close and reopen the door to
reactivate the lights.
Ice is not dispensing
Did you wait for 12 hours after installation of the water supply
line before making ice? If it is not sufficiently cool, it may take
longer to make ice, such as when first installed.
Is the water line connected and the water valve open?
Did you manually stop the ice making function? Make sure
you do not set the “ice off” mode.
Is there any ice blocked within the ice maker bucket or ice
chute?
Loading ...
Loading ...
Loading ...