Loading ...
Loading ...
Loading ...
8
the power tool repaired before use. Many
accidents are caused by poorly maintained
power tools.
6. Use the power tool, accessories and tool bits
etc. in accordance with these instructions,
taking into account the working conditions
and the work to be performed. Use of the
power tool for operations dierent from
those intended could result in a hazardous
situation.
Battery tool use and care
1. Recharge only with the charger specied by
the manufacturer. A charger that is suitable
for one type of battery pack may create a risk
of re when used with another battery pack.
2. Use power tools only with specically
designated battery packs. Use of any other
battery packs may create a risk of injury and
re.
3. When battery pack is not in use, keep it away
from other metal objects, like paper clips,
coins, keys, nails, screws or other small
metal objects, that can make a connection
from one terminal to another. Shorting the
battery terminals together may cause burns
or a re.
4. Under abusive conditions, liquid may be
ejected from the battery; avoid contact. If
contact accidentally occurs, ush with water.
If liquid contacts eyes, additionally seek
medical help. Liquid ejected from the battery
may cause irritation or burns.
5. Use only with the battery packs and chargers
listed below:
Battery pack Charger
YF60VRX2.5-BAT YF60VRX2A-CHG
Service
- Have your power tool serviced by a
qualied repair person using only identical
replacement parts. This will ensure that the
safety of the power tool is maintained.
CORDLESS LEAF BLOWER SAFETY
WARNINGS
1. Training
- Read the instructions carefully. Be familiar
with the controls and the proper use of the
appliance.
- Never allow children to use the appliance.
- Never allow people unfamiliar with these
instructions to use the appliance. Local
regulations may restrict the age of operator.
- Never operate the appliance while people,
especially children, or pet are nearby.
- The operator or user is responsible for
accidents or hazards occurring to other
people or the property.
2. Preparation
- While operating the appliance, always wear
substantial footwear and long trousers.
- Do not wear loose clothing or jewellery
that can be drawn into the air inlet. Keep
long air away from the air inlet.
- Wear protective goggles while operating.
- To prevent dust irritation the wearing of face
mask is recommended.
- Before using, always visually inspect the
rotating parts. Replace worn or damaged part
in sets.
- Never operate the appliance with defective
guards or shields, or without safety
devices.
3. Operation
- Switch the motor o and remove the battery
pack
- whenever you leave the machines;
-before clearing a blockage;
-before checking, cleaning or working on the
appliance;
-if the appliance starts to vibrate abnormally
- Operate the appliance only in daylight or in
good articial light.
- Do not overreach and keep your balance at
all times.
- Always be sure of your footing on slopes.
- Walk, never run.
- Keep all cooling air inlets clear of debris.
- Never blow debris in the direction of
bystanders.
- Operate the machine only at reasonable
hours – not early in the morning or late
at night when people might be disturbed.
Comply with times listed in local ordinance.
- Operate the machine at the lowest possible
engine speed to do the job.
- Use rakes and brooms to loosen debris
before blowing.
- In dusty conditions, slightly dampen surfaces
or use mister attachment if available.
- Use the full blower nozzle extension so the
air stream can work close to the ground.
- Watch out for children, pets, open windows
etc. and blow debris safely away.
- Do not start the tool when it is upside down
Loading ...
Loading ...
Loading ...