FEATURES
• Extremely bright and vibrant lighting for the
best possible quality from photos and videos
• Internal rechargeable battery does not drain
your phone battery
• Conveniently plugs into a headphone jack for
precise alignment with your subject
• 3 brightness modes (L - Low, M - Medium, H -
High) for ne tuning illumination
PACKAGE CONTENTS
• LED video light
• USB charging cable
• Quick Setup Guide
CHARGING THE BATTERY
1 Slide the power switch OFF.
2 Connect the USB charging cable from your video
light’s micro USB port to a power source (such as a
computer or USB power adapter (not included)).
The charging LED is red while charging, then turns
o when nished (about 2 hours).
USING YOUR VIDEO LIGHT
1 Connect the 3.5 mm connector to your mobile
device’s audio jack.
Note: The 3.5 mm connector is only used to secure
the light to your phone. It does not interface with
your phone. You may hold the light in your hand if
there is glare or your phone doesn't have a
headphone jack.
2 Slide the power switch ON.
3 Direct the video light at your subject and slide
the brightness switch to adjust the brightness,
as needed.
4 Use your mobile device to capture video or
images.
Before using your new product,
please read these instructions to prevent any damage.
Quick Setup Guide
|
NS-M16LED10
LED Video Light
Flat size (W×H): 12 x 4 in. (228.6 x 101.6 mm)
Flat size (W×H): 3 x 4 in. (76.2 x 101.6 mm)
Charging LED
3.5 mm connector
LED lights
Front
Left side: Right side:
Brightness
switch
Power switch
Micro USB port
Low 4 hours Medium 2 hours High 1 hour
Approximate Battery life (for each brightness setting)
NS-M16LED10_16-0083_QSG_V2_EN.ai 1 4/1/2016 11:25:09 AMNS-M16LED10_16-0083_QSG_V2_EN.ai 1 4/1/2016 11:25:09 AM
Loading ...
