Loading ...
Loading ...
Loading ...
Instructions for the installer
50
8. OVEN INSTALLATION
The oven must be installed on a free-standing horizontal work top. The distance
from the rear wall must allow easy access to the terminal board for connection of
the power supply cable. Installation must be carried out by a qualified
technician and in compliance with EC DIRECTIVES currently in force.
8.1 Electrical connection
Make sure the voltage and the cross-section of the power cord match the
specifications indicated on the identification plate positioned on the side of the
oven. Do not remove this plate for any reason.
The oven is fitted with an H07RN-F three-core cable for operation at 220-
240V∼ and a power supply plug.
The standard cable is of the three-core 3 x 1.5 mm2 H07RN-F type.
The power supply cable must be replaced by the manufacturer or by an
authorised service centre to prevent any risks.
The plug and wall-mounted socket must be of the same type (in accordance
with current regulations). Make sure that the supply line is suitably earthed.
Avoid the use of adapters and shunts.
If the appliance is connected to the electrical mains supply in a permanent
manner, install a multipolar cut-out device on the line, with contact opening
distance equal to or greater than 3 mm located near the appliance and in an
easily reachable position.
WARNING: if the phase voltage drops below 190V∼, the performance of the
oven may suffer, not due to the product itself.
The terminal indicated by this symbol links up parts that are normally earthed.
Connect the appliances appropriately using this terminal in
order to make sure that they are equipotential.
Weight: Kg 33.
Loading ...
Loading ...
Loading ...