Loading ...
Loading ...
Loading ...
Page 15
1. Remove the grass catcher.
2. Pull and turn the handle knobs 90°.
3. Fold down the handle.
4.Turn the handle knobs 90° to lock the
handle into position.
5. Stand the machine on end and make sure
a storage switch that prevents
engaged when the handle is folded
it is also important to remove the safety
,
that the brackets touch the
machine has
.
Storage Switch
The
its startup in the storage position. This switch is
automatically
down according to the instructions above.
However
key and the battery pack to prevent accidental
startup or unapproved use. The storage switch
does not eliminate the need for these actions.
MAINTENANCE
TROUBLESHOOTING
TROUBLESHOOTING
Problem Possible cause Solution
The handle is not in position. The bolts are not engaged
correctly.
Adjust the height of the handle
and make sure that the knobs
and bolts are aligned correctly.
The machine does not start. The battery capacity is low. Charge the battery pack.
The bail switch is defective. Replace the bail switch.
The battery key is not put in.
Put in the battery key.
The machine cuts grass un-
evenly.
The lawn is rough. Examine the mowing area.
The blade height is not set
correctly.
Move the wheels to a higher po-
sition.
The machine does not mulch
correctly.
Wet grass clippings attach
to the deck.
Wait until the grass dries before
mowing.
The mulch plug is missing. Install the mulch plug.
The machine is hard to push. The grass is too tall, or the
blade height is too low.
Increase the blade height.
The grass catcher and the
blade drags in thick grass.
Empty the grass clippings from
the grass catcher.
There is a high vibration in
the machine.
The blade is unbalanced
and worn.
Replace the blade.
The motor shaft is bent. 1. Stop the motor.
2. Remove the safety key and
battery pack.
3. Disconnect the power source.
4. Inspect for damage.
5. Repair the machine before
you start it again.
21 .GIF
Storage
Switch
Handle Knobs
Loading ...
Loading ...
Loading ...