Loading ...
Loading ...
Loading ...
14
ASSEMBLY
ASSEMBLING THE WHEELS (See Figure. 5)
The wheels are used to control the depth of operation. To adjust the height of the wheels.
1. Disconnect from power source.
2. Place cultivator in a stable position and transport as shown in Fig. 5
3. Insert the wheel assembly (2) into the support rod (3). (Fig. 5)
4. Pull out on spring-loaded knob (4) and slide wheel shaft up or down depending on the
depth trying to be achieved.
5. The deepest tilling is Position A and highest, Position B.
6. Wheels can be removed for greater tilling depth.
POSITION A - DEEPEST
(2) WHEEL ASSEMBLY
POSITION B - HIGHEST
Fig. 5
Loading ...
Loading ...
Loading ...