Loading ...
Loading ...
Loading ...
23
Getting Started
Set the date and time when you use your camcorder for the first time. Set the
geographical area, then daylight savings time([DST]), the year, the month, the day, the
hour and the minute, in that order. If you do not set the date and time, the [CLOCK
SET] display appears whenever you turn on your camcorder or change the mode dial.
If you do not use your camcorder for about 3 months, the date and time settings may
be cleared from memory because the built-in rechargeable battery in your camcorder
will have been discharged during that time. In that case, charge the built-in
rechargeable battery by connecting the AC adaptor, and set the date and time again
(page 16, 134).
1 Open the LCD screen while pressing OPEN.
2 Turn the power on by pressing the POWER button for a few seconds.
The CLOCK SET display appears.
3 Use the multi-selector to select the desired geographical area.
Step 4 Setting the date and time
Select with V/v/B/b and press the button in the
center to confirm your selection.
SETUP button
[ ENTER ] : NEXT ITEM
AREA 26
DST OFF
DATE Y M D
-5.0GMT
New York,Bogota
CLOCK SET
:
NEAR FAR
Multi-selector
OPEN button
Loading ...
Loading ...
Loading ...