Loading ...
Loading ...
Loading ...
8VHSDQVZKRVHGLDPHWHULVDVODUJHDVWKHJUDSKLFRIWKH]RQHVHOHFWHG
8VLQJDSRWDVOLJKWO\ZLGHUHQHUJ\ZLOOEHXVHGDWLWVPD[LPXPHIILFLHQF\,I\RXXVH
VPDOOHUSRWHIILFLHQF\FRXOGEHOHVVWKDQH[SHFWHG3RWOHVVWKDQPPFRXOGEH
XQGHWHFWHGE\WKHKRE
11
8
ENGLISH
FLEXIBLE AREA
This area can be used as a single zone or as two different
zones, accordingly to the cooking needs anytime.
Flexible area is made of two independent inductors that can
be controlled separately. When working as a single zone,
the part that is not covered by cookware is automatically
switched off after one minute.
- Anywhere with bigger cookware
To grant a correct pan detection and a even heat distribution,
the cookware should be correctly placed:
- In the front or rear side of the flexible zone when the
cookware is smaller than 22 cm
6
7
8
Beeij
2000
2000
MehcWb
3000
3000
Heating
Zone
The maximum power of cooking zones is
as follows:
R^[ WXel[ cWo lWho e j^[ i_p[
e\
j^[
fWd WdZ
j^[ cWj[h_Wb _j _i cWZ[ \hec
WYYehZ_d] j
3000
4000
Flexible
Area
9
1800
1800
2300
2300
Execute a recorded cooking cycle
Press the memory key, the timer indicator displays
" ",wait for 5 seconds, then
displays" ". The
zone corresponding at the recorded cooking cycle
will switch on and starts performing the cycle.
If the corresponding zone was already on, the
recorded cooking cycle will take the priority and
be performed.
If during the execution of a recorded cooking cycle
on the corresponding zone “+” or “-” key,the
recorded cooking cycle is aborted and normal
managing is restored.anyway the stored cooking
cycle is kept in memory.
Pan Dimension
The cooking zones are, up to a limit, automatically adapted
to the diameter of the pan. However the bottom of this pan
must have a minimum of diameter according to the
corresponding cooking zone. To obtain the best efficiency
of your hob, please place the pan in the center of the
cooking zone.
As big zone
To activate the flexible area as a single big zone, simply press
the dedicated keys.
The power setting works as any other normal area.
If the pot is moved from the front to the rear part (or viceversa),
the flexible area detects automatically the new position,
keeping the same power.
To add a further pot, press again the dedicated keys, in order
to detect the cookware.
As two independent zones
To use the flexible area as two different zones with different
power settings, press the dedicated keys.
Deactivation of the continuum zone
the continuum key again
Resetting the power of the continuum zone or
pressing
How to record one new cooking cycle
if we have already recorded one:
Activate the cooking zone we want to record by
pressing"+" or "-", the recording of
Hold down the" " key for a while,and the " "
will appear. " " means "cooking zone stored in
memory".
Then the" " will be displayed,
the cycle on the selected zone starts.
10
Loading ...
Loading ...
Loading ...