Loading ...
Loading ...
Loading ...
21
ELECTRICAL WARNINGS
For installation to comply with current safety regulations, an omnipolar
switch with minimum contact gap of 3mm is required and the appliance must
be earthed.
If the fitted plug is not suitable for your socket outlet, contact a qualified
technician.
The power cable must be long enough to connect the appliance, once fitted
in its housing, to the main power supply. Do not pull the power supply cable.
If the power cable is damaged, replace with an identical one.
The power cable must only be replaced by a qualified technician in
compliance with the manufacturer instruction and current safety regulations.
Contact an authorized service center.
For appliances with fitted plug, if the plug is not suitable for you socket outlet,
contact a qualified technician.
Do not use extension leads, multiple sockets or adapters.
Do not operate this appliance if it has a damaged mains cord or plug, if it is
not working properly, or if it has been damaged or dropped. Keep the cord
away from hot surfaces.
The electrical components must not be accessible to the user after
installation.
Do not touch the appliance with any wet part of the body and do not operate
it when barefoot.
CLEANING AND MAINTENANCE
Wear protective gloves for cleaning and maintenance.
The appliance must be disconnected from the power supply before any
maintenance operation.
Never use steam cleaning equipment.
Do not use abrasive or harsh cleaners such as window sprays, scouring
cleansers, flammable fluids, cleaning waxes, concentrated detergents,
bleaches or cleansers containing petroleum products on plastic parts, interior
and door liners or gaskets. Do not use paper towels, scouring pads, or other
harsh cleaning tools.
Loading ...
Loading ...
Loading ...