Loading ...
Loading ...
Loading ...
30
Safety InstructionsOperating InstructionsCare and CleaningTroubleshooting TipsCustomer Service
Before You Call For Service (cont.)…
Troubleshooting Tips
Problem Possible Causes What To Do
“F— and a number or
You have a function error code. • Press the
CLEAR/OFF
pad. Allow the oven to cool for
letter” flash in the display
one hour. Put the oven back into operation.
If the function code repeats. • Disconnect all power to the range for at least 30
seconds and then reconnect power. If the function
error code repeats, call for service.
Display flashes
Power failure. • Reset the clock.
Unable to get the
Oven control pads were • The
BAKE
and
BROIL HI/LO
pads must be pressed
display to show “SF”
not pressed properly. at the same time and held for 3 seconds.
Power outage,
Power outage or surge. • Reset the clock. If the oven was in use, you must reset
clock flashes
it by pressing the
CLEAR/OFF
pad, setting the clock
and resetting any cooking function.
“Burning” or “oily”
This is normal in a new oven • To speed the process, set a self-clean cycle for a
odor emitting from
and will disappear in time. minimum of 3 hours. See the
Using the self-
the vent cleaning oven
section.
Strong odor
An odor from the insulation • This is temporary.
around the inside of the oven
is normal for the first few times
the oven is used.
Improper air/gas ratio in • Call for service.
the oven.
Fan noise
A cooling fan may • This is normal. The cooling fan will turn off and on.
automatically turn on and
off to cool internal parts.
Loading ...
Loading ...