Loading ...
Loading ...
Loading ...
C
4 Put the juice cup in place.
5 Select the right speed setting to switch the appliance on.
C
6 Put the ingredients in the feeding tube. Before processing, cut
large ingredients into pieces that fit into the feeding tube.
C
7 Push the ingredients gently down with the pusher.
Do not exert too much pressure on the pusher, since this would affect
the quality of the end result and it could even cause the sieve to come
to a halt.
8 If no more juice comes out, switch the appliance off and wait
until the sieve has stopped rotating before releasing the clamp.
9 Remove the juice cup.
B
For recipes see further on in this booklet.
Do not let the juice extractor run contnously for more than 2 minutes
If you have not finished extracting juice, switch the appliance off and
allow it to cool down for 2 minutes before you continue.
Tips
◗ If the pulp container is full during processing, switch the appliance
off and wait until the sieve has completely stopped rotating.
Unfasten the clamp and remove the lid. Remove the sieve. Detach
the pulp container from the motor unit by turning it to the right
and remove it. Empty the pulp container and clean the sieve.
Reassemble the juice extractor and switch it on again.
◗ If the juice cup is full during processing, switch the appliance off
and wait until the sieve has completely stopped rotating. Remove
the juice cup and empty it.The maximum content of the juice cup
is 700 ml.
◗ Before processing it is unnecessary to remove thin peels and skins.
Only thick peels (e.g. those of oranges, pineapples or uncooked
beetroots) need to be removed.
ENGLISH12
Speed
speed 1
speed 2
Ingredients to process
fruits (soft)
fresh coconut, beetroots (hard)
Loading ...
Loading ...
Loading ...