Loading ...
Loading ...
Loading ...
6. The disassembly process is similar for the bottom-control machine, except instead of
removing the control panel remove the two screws from the front top blank panel and
demount the panel
7. Swap the TOP panels between the top-and-bottom-control machines
After swapping the TOP panels
10. From the bottom control machine, remove the rectangular knock-out plate, as
indicated in the picture using a hammer and screw driver.
11. Also, remove the four leveling legs from the base panel of the machine.
8. Adjust the feet on the Top Control machine, to level it according to the intended
installation position and remove the drum contents from the bottom-control dryer.
9. Flatten a machine carton, and tilt the bottom-control dryer on one of its sides on the carton
Loading ...
Loading ...
Loading ...