Loading ...
Loading ...
Loading ...
27. Route the extended wiring harness from the CN 9 connections through the hole in
the base panel of the bottom control machine (see step 9) and connect the coin meter
connector (Red, White and Blue wires) to the “TOP” assigned meter of the dual coin
connections of the Top Control Machines.
28. Once the connections are properly made, mount back the control panel frame and
the cross frame.
29. Before remounting the control, panel reconnect the harness connections.
30. Lock the controller using the service key.
10. Install and tighten the locking-screw that was taken from the stacking bracket in
step 12 back into the bracket through the clearance hole provided in the base of the top
dryer.
26. Re-assemble the control console of the top machine and re-connect the CN8 and
CN3 connectors of the control board back to machine.
Loading ...