Loading ...
Loading ...
Loading ...
Installation
25
a
The motor can be rotated for installation, so exhaust air can be extracted
upwards, left, right or downwards.
The motor can also be fitted in the same position at the back of the appliance.
If the motor is fitted at the back of the appliance, the back panel of the furniture
housing unit must be cut out in the installation area and sufficient installation
space must be provided behind the unit. Alternatively, the motor can be
installed remotely from the appliance using the DEXT6890 mounting kit
(optional accessory).
b
The electrical connection box can be positioned as required on the left or right
beside the motor on the rangehood itself or in the housing unit. If the electrical
connection box is fitted at the back of the appliance, the back panel of the
furniture housing unit must be cut out in the installation area and sufficient
installation space must be provided behind the unit.
c
The following minimum safety distances between the cooktop and the
rangehood must be maintained, unless the cooktop manufacturer states that a
greater distance is required:
In combination with an electric cooktop: min.30mm.
In combination with a gas cooktop: min.50mm.
Please note the information below when using the downdraft rangehood in
combination with a cooktop. All materials used must be sufficiently stable.
d
Stepped cut-out for flush-fit installation in stone worktops (granite, marble).
Exhaust connection 150mm.
Please refer to the cooktop manufacturer's instructions when installing the
rangehood in combination with a cooktop. The installation and safety distance
requirements must be maintained.
The total output of a multi-burner gas cooktop must not exceed 44.6MJ/h, with
no single burner exceeding 16.2MJ/h. Gas cooktops with a greater output
cannot be used in combination with this downdraft rangehood.
If you are planning to install an oven in front of the appliance, the appropriate
installation advice and dimensions regarding cool air circulation must be
observed.
Loading ...
Loading ...
Loading ...