Loading ...
Loading ...
Loading ...
Tire Puncture u Removing Wheels
84
Troubleshooting
4.
Loosen the drive chain lock nuts and drive
chain adjusting nuts on both sides of the
swingarm.
5.
Remove the rear axle nut while holding
the rear axle shaft at the other end with a
wrench.
6.
Remove the drive chain from the rear
wheel sprocket by pushing the rear wheel
forward.
7.
Remove the rear axle shaft, rear wheel
and side collars from the swingarm.
Installation
1.
Install the side collars into the rear wheel.
2.
Place the rear wheel between the
swingarm and install the drive chain over
the rear wheel sprocket.
3.
Insert the rear axle shaft from the left
side, through the left swingarm, wheel
hub and brake panel.
4.
Temporarily tighten the rear axle nut.
5.
Reassemble the brake stopper arm and
tighten the stopper arm nut.
6.
Connect the brake rod to the brake arm.
7.
Adjust the drive chain slack.
2
P. 68
8.
Adjust the rear brake pedal freeplay.
2
P. 62
9.
Tighten the rear axle nut.
Drive chain
adjusting nut
Drive chain
lock nut
Rear axle shaft Drive chain
Torque: 16 lbf·ft (22 N·m, 2.2 kgf·m)
Torque: 65 lbf·ft (88 N·m, 9.0 kgf·m)
Loading ...
Loading ...
Loading ...