Loading ...
Loading ...
Loading ...
6
OPERATING INSTRUCTIONS
FUNCTION INSTRUCTION
The default temperature setting is 54°F (12°C). The
default temperature scale is °F.
To switch the display between °F and °C, press and
hold the up and down buttons at the same time for
approximately 3-5 seconds.
The temperature can be set as low as 41°F (5°C) or
as high as 64°F (18°C).
Actual temperature inside the appliance can vary
based on ambient temperature, how often the door
is opened and how many warm beverages have
recently been added to the appliance.
Each depression of the up and down buttons will
adjust the temperature in 1° increments.
Temperature Memory
If the appliance loses power, the control panel
will remember the set temperature. Once power
is restored, the appliance will return to normal
functioning automatically.
Demo Mode
This mode can show what the appliance will look
like when in use without engaging the compressor.
The light will function normally, the fan will run on
low speed and all alarms will be disabled.
To engage demo mode, press and hold the light
button and the down button at the same time for 10
seconds. The display will fl ash “dE” and “on” fi ve
times to confi rm.
To disengage demo mode, press and hold the light
button and the down button at the same time for 10
seconds. The display will fl ash “dE” and “of” fi ve
times to confi rm.
ALARM INSTRUCTION
Door Ajar Alarm
If the door is not closed completely for 5 minutes,
an alarm will sound. Close the door to silence the
alarm.
If the door is closed and the alarm continues to
sound, check that the actuator at the bottom of
the door is making contact with the switch on the
appliance.
If the door alarm sounds when loading the
appliance, it can be silenced by pressing the power
button once.
Temperature Alarm
If the inner cabinet temperature is higher than 73°F
(23°C) for one hour, the error code “HI” will show
on the display panel and an alarm will sound.
If the inner cabinet temperature is lower than 32°F
(0°C) the error code “LO” will show on the display
panel and an alarm will sound.
If the inner cabinet temperature remains at 32°F
(0°C) for more than 30 minutes, the error code
“CL” will show on the display panel and an alarm
will sound. The appliance will stop functioning to
prevent the contents from freezing.
Loading ...
Loading ...
Loading ...