Loading ...
Loading ...
Loading ...
LEFT REAR
(9)
(9) rear axle nut
163
If You Have a Flat Tire
Taking Care of the Unexpected
Move the wheel to the right to separate
it from the final drive gear case.
Remove the wheel.
Pull the rear axle shaft out and remove
the side collar.
While holding the other end of the rear
axle shaft ( ) with a wrench, remove
the rear axle nut ( ).
(cont’d)
Insert the rear axle shaft from the right
side, through the right swingarm, brake
panel, wheel hub and final drive gear
case.
Install the side collar into the brake
panel.
Position the wheel between the
swingarm and the final drive gear case.
Be sure the splines on the wheel hub fit
into the final drive gear case.
Before installing the wheel, check that the
wheel hub and final drive gear splines are
coated with molybdenum disulfide paste
(USA only: Pro Honda Moly 60 Paste, or
equivalent).
Wheel Installation
1.
2.
3.
6.
7.
8.
9.
8
9
(VT750C)
１０／０９／０３ １４：０６：４８ ３１ＭＥＧ６７０ ０１７２
Loading ...
Loading ...
Loading ...