Loading ...
Loading ...
Loading ...
E-20
As part of our policy of continuous improvement,
SHARP reserves the right to make design and
specication changes for product improve-
ment without prior notice. The performance
specication gures indicated are nominal
values of production unit. There may be some
deviations from these values in individual unit.
■ General
Power source DC IN 17V 2.8A: AC/DC
adaptor
(AC 100 - 240V ~ 50/60Hz)
Power
consumption
9W
Maximum
output power
RMS: Total 40 Watts
20 Watts per channel into
6 ohms at 1 kHz, 10% total
harmonic distortion
FTC: Minimum 12 watts
per channel into 6 ohms at
100 Hz to
20 kHz, 1% total harmonic
distortion
Speaker 2-way Speaker System
2-1/4” (5.7cm) Woofer
1” (2.5cm) Soft Dome
Input
terminals
Analog input (AUDIO IN):
Stereo mini jack Ø 3.5mm
500mV / 47kohms
Optical digital input
(OPTICAL): Square type x 1
Bluetooth
Frequency
Band
2.400GHz - 2.480GHz
Compatible
Bluetooth
Prole
A2DP (Advanced Audio
Distribution Prole), AVRCP
(Audio/Video Remote Control
Prole)
Bluetooth 2.1 +EDR
Dimensions Width: 37” (940mm)
Height: 2-7/8” (73mm)
Depth: 3-1/4” (83mm)
Weight 5.1 lbs. (2.3 kg)
■ Condensation
Sudden temperature changes, storage or operation
in an extremely humid environment may cause
condensation inside the cabinet or on the transmitter
on the remote control.
Condensation can cause the sound bar to malfunc-
tion. If this happens, leave the power on until normal
operation is possible (about 1 hour). Wipe off any
condensation on the transmitter with a soft cloth before
operating the sound bar.
■ Factory reset, clearing all setting
1. Press ON/STANDBY button to enter the power
standby mode.
2. While pressing down the PAIRING button,
press the ON/STANDBY button.
3. Press the ON/STANDBY button again. (PAIRING
indicator will turn BLUE.)
Caution:
This operation will erase all data stored in
memory.
■ If problem occurs during operation
When this product is subject to strong external inter-
ference (mechanical shock, excessive static electric-
ity, abnormal supply voltage due to lightning, etc.) or if
it is operated incorrectly, it may malfunction.
If such a problem occurs, do the following:
1 Set the sound bar to the standby mode and
turn the power on again.
2 If the sound bar is not restored in the previous
operation, unplug and plug in the sound bar,
and then turn the power on.
Maintenance
■ Cleaning the cabinet
Periodically wipe the cabinet with a soft cloth.
Cautions:
● Do not use chemicals for cleaning (petrol, paint
thinner, etc.). It may damage the cabinet nish.
● Do not apply oil to the inside of each compo-
nent. It may cause malfunctions.
SOUND BAR HOME THEATER SYSTEM HT-SB30D
Troubleshooting chart Specications