Loading ...
Loading ...
Loading ...
E-17
Bluetooth wireless technology is a short-range radio
technology that enables wireless communication
between various types of digital devices, such as
mobile phone or computer. It operates within a range
of about 30 feet (10 meters) without the hassle of
having to use cables to connect these devices.
This sound bar supports the following:
Communication System: Bluetooth Specification
version 2.1 Bluetooth + Enhanced Data Rate
(EDR).
Support Prole : A2DP (Advanced Audio Distribution
Prole) and AVRCP (Audio/Video Remote Control
Prole)
Notes when using unit with a mobile phone
● This unit cannot be used to talk over the
telephone even when there is a Bluetooth
connection made to a mobile phone.
● Please refer to the operating manual supplied
with the mobile phone for details on operation of
your mobile phone while transmitting the sound
using a Bluetooth connection.
■ Pairing Bluetooth devices
Bluetooth devices need to be initially paired rst
before they can exchange data. Once paired, it is
not necessary to pair them again unless:
● pairing is made with more than 99 devices.
Pairing can only be made one device at a time.
This sound bar can be paired to a maximum
of 99 devices. If subsequent device is paired,
the oldest device paired, will be deleted and
replaced with the new one.
● this sound bar is reset. All pairing information
is deleted when sound bar is reset.
● pairing information is deleted while repairing,
etc.
On indicators
Status PAIRING indicator (blue)
Unconnected Blinks
Pairing mode Blinks quickly
Connected Lights up
However, the indicator status is not displayed during
low power consumption mode.
■ Pairing with other Bluetooth
source device
1 Press the ON/STANDBY button to turn the
power on.
2 Press the INPUT button to select Bluetooth func-
tion. (PAIRING indicator blinks.)
3 Press and hold the PAIRING button for 3 sec-
onds or more.
PAIRING indicator blinks quickly. The sound bar is
now in pairing mode and is ready to be paired with
other Bluetooth source device.
4 Perform pairing procedure on the source device
to detect this sound bar. “HT-SB30D SHARP”
will appear in the detected devices list (if avail
-
able) in the source device. (Refer the source
device operating manual for details).
Notes:
● Place the devices to be paired within 3 feet (1 me-
ter) of each other when pairing.
● Some source devices are unable to display lists of
detected devices. To pair this sound bar with the
source device, refer to the source device operating
manual for details.
5 Select “HT-SB30D SHARP” from the source list.
If Passcode* is required, enter “0000”.
* Passcode may be called PIN Code, Passkey, PIN
number or Password.
6 Pairing indicator (blue) will stop blinking once
the sound bar is successfully paired with the
source device. (Pairing information is now
memorized in the sound bar.)
Some audio source devices may connect with the
sound bar automatically after pairing is completed,
otherwise follow the instructions in the source device
operating manual to start connection.
7 Press the play button on remote control or
source device to start Bluetooth streaming
playback.
Listening to Bluetooth enabled devices
Loading ...
Loading ...
Loading ...