Loading ...
Loading ...
Loading ...
30
Safety Instructions
Operating Instructions
Care and CleaningTroubleshooting TipsCustomer Service
Before you call for service…
Troubleshooting Tips
Problem Possible Causes What To Do
“F— and a number or You have a function error code. • Press the CLEAR/OFF pad. Allow the oven to cool for
letter” flash in the display one hour. Put the oven back into operation.
If the function code repeats. • Disconnect all power to the range for at least 30
seconds and then reconnect power. If the function
error code repeats, call for service.
Display flashes Power failure. • Reset the clock.
Unable to get the Oven control pads were • The BAKE and BROIL HI/LO pads must be pressed
display to show “SF” not pressed properly. at the same time and held for 3 seconds.
Power outage, Power outage or surge. • Reset the clock. If the oven was in use, you must reset
clock flashes it by pressing the CLEAR/OFF pad, setting the clock
and resetting any cooking function.
“Burning” or “oily” This is normal in a new oven • To speed the process, set a self-clean cycle for a
odor emitting from and will disappear in time. minimum of 3 hours. See the Using the self-
the vent cleaning oven section.
Strong odor An odor from the insulation • This is temporary.
around the inside of the oven
is normal for the first few times
the oven is used.
Improper air/gas ratio in • Call for service.
the oven.
Fan noise A cooling fan may • This is normal. The cooling fan will turn off and on.
automatically turn on and
off to cool internal parts.
Loading ...
Loading ...