Loading ...
Loading ...
Loading ...
7
- Only use suitable ground coffee or K-cup capsules. Do not place
ground coffee/capsule directly into the Insert Holder . Do not place
other than the recommended ground coffee/capsule into the
Ground Coffee Holder / Capsule Holder.
- Some capsules may not work with this appliance. If the capsule
does not properly fit into the Capsule Holder, or leaks during the
brewing cycle, do not use that type of capsule again.
4. Press the Lid down into the lock position to close the Lid.
5. Place the Drip Tray with Cup Holder in either the upper, middle or lower
Mounting Slots . Ensure it is securely in place when using the middle or upper
Mounting Slots and sits flat when using the lower Mounting Slots.
6. When using the Ground Coffee Holder , ensure it contains the required amount
of ground coffee. Fill with ground coffee up to the MAX fill line. Do not overfill it.
Do not compress the ground coffee in the Ground Coffee Holder. Do not use
ground coffee for Espressos, as it is too fine and can clog the Ground Coffee
Holder. Insert the Ground Coffee Holder in the Insert Holder.
NOTE:
- Use the lower Mounting Slots when using large mugs and the
upper or middle Mounting Slots when using small cups.
- When removing the Water Reservoir with Lid close the Lid. rside
of the Lid or inside the Capsule Holder, they are sharp.
7. Lift the Water Reservoir With Lid and remove it from the appliance. Remove
the lid from the Water Reservoir With Lid.
8. Fill the Water Reservoir With Lid with fresh cold water and then refit the Water
Reservoir With Lid afterward.
WARNING:
- Do not over or under fill the Water Reservoir With Lid. Ensure the
water level is always between the Min (6oz) and MAX (30oz)
Loading ...
Loading ...
Loading ...