Global Air YPL310C ortable Air Conditioner 10000 BTU Compact Portable AC Unit

INSTALLATION

Selection of installation location

Keep the unit on a flat surface and dry place. Leave at least 20 inch space all around the unit

Installation

Fix the exhaust hose into the adapter, and then fix the other side of the exhaust hose into the air outlet vent of the unit. (anti-clockwise)

Open/Expand two to three rings on the exhaust hose first then press and turn Anti-Clockwise. Fix the adapter into the window slider kit, and then half open the window to meet the width of the window slider kit. The length of the window slider kit is adjustable.

Incorrect mounting

Preventing any bends of the exhaust pipe is very important. Incorrect mounting can prevent the machine from working correctly. Take care to prevent any sharp bows or bends of the exhaust hose. The exhaust air must flow freely。

PART NAME

(The location of placing the plug is for reference only, different models will have different location for plug placing )

Notice：When the air conditioner is not used or needs to be moved， recommend to place the plug on the location at the back panel. Easy to move and avoid fouling. As shown in the picture.

Check all the accessories included in the package and please refer to the installation instructions for their usage

Accessories

CONTROL PANEL

1. POWER button: press this button to turn on/off the unit.
2. SPEED button: press this button to select high, low fan speed
3. Timer: During Stand-by mode press this key to set automatic time on; During running mode press this key to set automatic time off.
4. UP button: Press this button to set the temperature higher when cooling; Press this button to add time on timer ; to switch Fahrenheit to Celsius.
5. DOWN button: press this button to set the temperature lower or higher when cooling; press this button to adjust time shorter or longer on Timer ; to switch Fahrenheit to Celsius
6. MODE button：press the button to select cooling , dehumidification and fan mode.

REMOTE CONTROL

OPERATION METHODS

Cooling mode

When the unit is turned on it will default to cool mode or press Mode button to choose cool mode, the Cool mode indicator will flash.

• Press UP or DOWN button to set room temperature between 60 to 86 F.
• Press FAN SPEED button (or High/Low button) to select high, low fan speed.

Fan mode

• Press Fan button to choose Fan mode, the Fan mode indicator will flash.
• Select the fan speed by press SPEED button or press High / Low button directly.
• The temperature will remain the same.

Dehumidification mode

• Press Mode button to choose dehumidification mode, the indicator will flash.
• Under the dehumidification mode, the fan speed is low speed and can not be adjusted.
• Temperature can not be set.
• If the room temperature is ≥17℃(62℉),the compressor will run . When the room temperature is ≤15℃(59℉),the compressor will stop; When the room temperature rise back to 17℃(62℉), the compressor will restart.

Sleep mode （Optional Function）

Press this button to activate or cancel sleep function in cooling mode

The unit will run at the low fan speed as default with lower noise. The setting temperature will increase 1 degree per 2 hours running time, and it will not change after increasing 2 degrees Under the sleep mode, the fan speed is low speed and can not be adjusted.If press the speed button,the display shows ‘SL’.

Timer mode

• When the appliance is switch off, press Timer button to set timer-on.
• Press Up or Down button to adjust time from 0 to 24 hours. The Timer on indicator will flash.
• When the appliance is running, press Timer button to set timer-off.
• Press Up or Down button to adjust time from 0 to 24 hours. The Time off indicator will flash.

WATER DRAINAGE

This product has a self-evaporative system. The condensing water will be recycled to cool the condenser. This can not only improve cooling efficiency, but also save energy for you.

• If the inside water is full, the display panel will display “FL”, and the compressor will stop running.
• Please turn the machine off and move the machine to the place where the water can be drained, then unplug the water-draining hole. After drainage, you can power it on and the machine will run again.

MAINTENANCE

Note: Turn off the unit and unplug it before any maintenance or repair begins to avoid electric shock

Cleaning

• Unplug the unit before any cleaning.
• Clean the housing with a soft moisture cloth. Do not use chemical solvent (such as benzene, alcohol, gasoline). The surface may be damaged or even the whole case may be deformed.
• Do not sprinkle water on the unit.

Air filter

• Clean the air filter every 2 weeks. If the air filter is blocked with dust, the efficiency will reduce.
• Open the air filter cover upwards, and then take out the air filter.
• Use vacum cleaner to vacum off all lint and dander trapped on filter.
• Wash the air filter by immersing it gently into warm (about 40℃ water with a neutral detergent, rinse it and dry it thoroughly in a shaded place

Storage

• Please drain the water.
• Keep the unit running in Fan mode for two hours until the inside of the unit is dry.
• Turn off the unit and unplug it.
• Clean the air filter and after dry it thoroughly, reinstall it.
• Remove the exhaust pipes and keep them carefully.
• Wrap the unit with the plastic bag and keep it in a dry place.
• If possible store unit in its original box.

TROUBLE SHOOTING

Before contacting professional service, check it first yourself referring to the followings:

Intelligent fault detection

Related Products