PHANTOM 4 ADVANCED User Manual

Loading ...

Flight

Phantom 4 Advanced / Advanced+ User Manual

c. If Landing Protection is not operational, the DJI GO 4 app will display a landing prompt when the

Phantom 4 Advanced / Advanced+ descends below 0.3 meters. Pull down on the throttle or use the

auto landing slider to land.

4. Aircraft will land and turn off automatically.

Starting/Stopping the Motors

Starting the Motors

A Combination Stick Command (CSC) is used to start the motors. Push both sticks to the bottom

inner or outer corners to start the motors. Once the motors have started spinning, release both sticks

simultaneously.

Stopping the Motors

There are two methods to stop the motors.

Method 1: When Phantom 4 Advanced / Advanced+ has landed, push the left stick down , then

conduct the same CSC that was used to start the motors, as described above . Motors will stop

immediately. Release both sticks once motors stop.

Method 2: When the aircraft has landed, push and hold the left stick down. The motors will stop after three

seconds.

Method 1 Method 2

Stop the Motor Mid-ight

Pull the left stick to the bottom inside corners and press the RTH button at the same time.

Only stop the

motors mid-ight in emergency situations when doing so can reduce the risk of damage or injury.

Loading ...

Dji PHANTOM 4 ADVANCED